The role of a specifier? Right Ans - 1. determine the responsibility for
structural specs with structure engineer;
2. coordinating standardized keynotes lists to be used on all drawings with
the architect;
3. obtain a preferred general condition document from the client through the
architect;
4. recommending everyone to use BIM;
What are included in the preliminary studies? Right Ans - 1. allowable
height;
2. allowable area and occupant allowance;
3. fire rating requirements;
Percolation rate is used to determine what? Right Ans - To determine
whether porous pavement should be used.
Forest Steward Council (FSC) Right Ans - Harvesting tree without violating
people's right.
Under what condition can you put storage under stair? Right Ans - If it's
protected with a minimum of 1-hour rated construction.
Where should the fire extinguisher cabinet (FEC) located? Right Ans - 48" -
60" AFF, no more than 4" extrusion.
Tear-out, Pull-through Right Ans - Tear-out: shear failure in a bolted
connection due to tension at hole;
Pull-through: a compression failure where bolts pull through the holes.
ANSI, ASTM Right Ans - ANSI: American National Standard Institute;
ASTM: American Society for Testing Material, it's used for testing materials.
Composition of cement Right Ans - Limestone, clay, iron ore, gypsum
Subsystem estimate is used in which phases of design? Right Ans - SD and
DD. Subsystem estimates deal with a project's functional units and it enables
,comparisons. It includes major systems: foundation, superstructure, roofing,
fixed equipement.
Hard pipes, soft pipes Right Ans - hard pipes: ABS, CPVC, PP
soft pipes: PE, PEX-AL-PEX
Scarf joint Right Ans -
Which division: hydraulic elevators Right Ans - Division 14: Conveying
Equipment
Which division: toilet Right Ans - Division 22: Plumbing
turn-of-nut method Right Ans - Each bolt is tightened snug, then turned a
specified additional fraction of a turn
Slip Critical Bolts Right Ans -
glass thickness of single-strength, double-strength? Right Ans - single-
strength: 3/32" used for painting frames
double-strength: 1/8" used for window
weather stripping Right Ans - Foam rubber, expansion metal, spring metal;
used to seal air leaks.
cementitious backer unit (CBU) Right Ans - used to put at the back of
ceramic tiles to allow a flat surface and moisture management.
Which division: roll-down window shades? Right Ans - Division 12:
Furnishing
Smoke partition vs smoke barrier Right Ans - smoke barrier requires an 1-
hour rating but partition doesn't
Minimum required clear width between handrail of ADA ramp? Right Ans -
36"
Which division: terrazzo flooring Right Ans - Division 9: finishes
, Angle of repose Right Ans - high angle of repose: fine and sticky material,
ex. wet sand.
low angle of repose: sandy material.
which division: dry-pipe sprinkler Right Ans - Division 22: plumbing
quartersawn lumber characteristics Right Ans - even grain pattern, shrink
and swell less in width, wears evenly, more stable and more expensive than
plain sawing.
Flame Spread Rating Right Ans - Class A: lowest flame spread,
Class B
Class C: highest flame spread.
photoelectric detector
ionization detector
gas-sensing system detector Right Ans - photoelectric detector: detects
smokes
ionization detector: detects combustion-ionized particles, but not smoke;
gas-sensing system: detects combustion gas in the air.
sprinklers head activate at what temperature? Right Ans - 135-170 degree
What architect should do for detail design? Right Ans - construction trade
sequence, tolerance, clearances.
Which division: lighting Right Ans - Division 26: electrical
Minimal placing of anchor bolt at steel plates? Right Ans - 48" o.c.
Which division: scaffolding Right Ans - Division 14: conveying equipement
Who much load can a handrail resist? Right Ans - 200#
Air Change Method Right Ans - Often used in residential construction and
in large warehouses and similar buildings. It measures how often air is
replaced with new air.
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller Studyhall. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $16.99. You're not tied to anything after your purchase.