Class notes
JCB Robot 160, 170, 180T Service Manual PDF
- Course
- AGRI101
- Institution
- Massachusetts Institute Of Technology
Complete PDF Service Manual for JCB ROBOT 160, JCB ROBOT 170 and JCB ROBOT 180T.
[Show more]
Seller
Follow
Content preview
General Information 1Care & Safety 2
R Routine Maintenance 3
Attachments A
Service Body & Framework B
Manual Electrics C
ROBOT
Controls D
160, 170, Hydraulics E
180T
Transmission F
PUBLISHED BY THE
TECHNICAL PUBLICATIONS DEPARTMENT
OF JCB SERVICE; ©
WATERLOO PARK, UTTOXETER,
STAFFORDSHIRE, ST14 5PA, ENGLAND
Brakes G
Tel. ROCESTER (01889) 590312
PRINTED IN ENGLAND
Publication No. 9803/8520 Iss 14 Tracks J
Copyright © 2004 JCB SERVICE
All rights reserved. No part of this publication may be reproduced, stored in
a retrieval system, or transmitted in any form or by any other means, elec-
K
tronic, mechanical, photocopying or otherwise, without prior permission
from JCB SERVICE.
Engine
,Introduction
This publication is designed for the benefit of JCB Distributor Service Engineers who are receiving, or have received, training by
JCB Technical Training Department.
These personnel should have a sound knowledge of workshop practice, safety procedures, and general techniques associated
with the maintenance and repair of hydraulic earthmoving equipment.
Renewal of oil seals, gaskets, etc., and any component showing obvious signs of wear or damage is expected as a matter of
course. It is expected that components will be cleaned and lubricated where appropriate, and that any opened hose or pipe
connections will be blanked to prevent excessive loss of hydraulic fluid and ingress of dirt. Finally, please remember above all
else SAFETY MUST COME FIRST!
The manual is compiled in sections, the first three are numbered and contain information as follows:
1 = General Information - includes torque settings and service tools.
2 = Care & Safety - includes warnings and cautions pertinent to aspects of workshop procedures etc.
3 = Routine Maintenance - includes service schedules and recommended lubricants for all the machine.
The remaining sections are alphabetically coded and deal with Dismantling, Overhaul etc. of specific components, for example:
A = Attachments
B = Body & Framework ...etc.
The page numbering in each alphabetically coded section is not continuous. This allows for the insertion of new items in later
issues of the manual.
Section contents, technical data, circuit descriptions, operation descriptions, etc. are inserted at the beginning of each
alphabetically coded section.
All sections are listed on the front cover; tabbed divider cards align directly with individual sections on the front cover for rapid
reference.
Where a torque setting is given as a single figure it may be varied by plus or minus 3%. Torque figures indicated are for dry
threads, hence for lubricated threads may be reduced by one third.
'Left Hand' and 'Right Hand' are as viewed from the rear of the machine facing forwards.
9803/8520 Issue 1
,Section 1 General Information Section 1
i i
Contents Page No.
Identifying your Machine 1-1
* Torque Settings
- Unsealed Hoses and Adapters 2-1
- ‘O’ Ring Face Seal System 2-3
- ‘Torque Stop’ Hose System 2-4
Service Tools
- Numerical List 3-1
- Body and Framework 4-1
- Electrics 5-1
- Hydraulics 6-1
- Transmission 7-1
Sealing and Retaining Compounds 8-1
9803/8520 Issue 2*
, Section 1 General Information Section 1
1-1 Identifying your Machine 1-1
Machine Identification Plate
On early machines the machine identification plate is located
as shown at A, on later machines the plate is located as
shown at B. The plate is stamped with the serial numbers of
the major individual units. A
C
Typical Vehicle Identification Number (VIN)
SLP 165 S B V E 677001
1 2 3 4 5 6 7 326580
1 World Manufacturer Identification
2 Machine Model
B
3 Machine Type (S = Standard, H = High-flow)
4 Build Type (A = Canopy, B = Cab)
5 Year of Manufacture:
W = 1998 2 = 2002
X = 1999 3 = 2003
Y = 2000 4 = 2004
1 = 2001 5 = 2005
6 Manufacturer Location (E = England) 338180
7 Product Identification Number (PIN)
JCB COMPACT PRODUCTS LIMITED
HAREWOOD ESTATE, LEEK ROAD,
CHEADLE, STOKE ON TRENT,
Unit Identification R
UNITED KINGDOM ST10 2JU
CONSTRUCTOR MADE IN UK
The chassis serial number is stamped on the front face of
Vehicle Identification No. Product Identification No.
the chassis as shown at C.
ENGINE SERIAL No. WEIGHT
The engine serial number is stamped on a label D on the left
side of the cylinder block. PUMP SERIAL No. YEAR OF MANUFACTURE
MODEL 80/1269/EEC MODEL 80/1269/EEC
The hydraulic pump unit serial number is stamped on a plate POWER KW R.P.M. POWER KW R.P.M.
160 35.7 2600 190 59.7 2200
on the bottom face of the pump. 170 37.3 2800 190 HF 59.7 2200
170 HF 37.3 2800 1110 68.6 2200
160 HF 35.7 2600 1110 HF 68.6 2200
If any of the major units are replaced with new ones, the
1CX 37.3 2800 1CX HF 37.3 2800
relevant serial number on the Machine Identification Plate 180 44.7 2800 180 HF 44.7 2800
will be superseded. Either stamp the plate with the new 817/19702
number or stamp out the old number.
Left Side, Right Side D
In this manual, 'left' X and 'right' Y mean your left and right
when you are seated correctly in the machine.
Y
S255430
X 323860
9803/8520 Issue 3
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller manualwizard. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $19.99. You're not tied to anything after your purchase.
Can Stuvia be trusted?
4.6 stars on Google & Trustpilot (+1000 reviews)
73216 documents were sold in the last 30 days
Founded in 2010, the go-to place to buy study notes for 14 years now