In some oil supply systems, an alarm is triggered when the reservoir __________.
- Is in safe mode
- Is at a low level
- Is filled to proper level
- Contains air - ANSWERS-Is at a low level
During an oil analysis, high oil temperature can cause what symptom?
- High viscosity
- No odor
- Burned or pungent odor
- Good oil - ANSWERS-Burned or pungent odor
According to proper maintenance practices, how often should oil be added to the
oil reservoir?
- As often as needed
- At the beginning of each shift
- According to the manufacturer's recommendation
- Checking and adding oil is not necessary - ANSWERS-According to the
manufacturer's recommendation
,Storing lubricants in the proper designated areas is an example of following
__________.
- Correct storage procedures
- PPE requirements
- Quality policy
- The leader - ANSWERS-Correct storage procedures
Which lubrication application method is most often used in machinery with low
operating speeds?
- Drip or gravity
- Manual
- Splash
- Bath - ANSWERS-Manual
Food processing equipment uses __________ for lubrication.
- WD-40
- White grease or FGL-1
- Synthetic grease
- Vegetable based grease only - ANSWERS-White grease or FGL-1
What type of bearing should not be lubricated?
- Ball bearing
,- Block bearing
- Unsealed bearing
- Sealed bearing - ANSWERS-Sealed bearing
Grease is classified as what kind of lubricant?
- Solid
- Semisolid
- Liquid
- Gas - ANSWERS-Semisolid
Too little lubrication of what component can cause seizing in a machine?
- Belts
- Sprockets
- Sheaves
- Bearings - ANSWERS-Bearings
When should you stop pumping grease into a pillow block bearing?
- When new grease begins to flow out of the bearing
- When old grease begins to flow out of the bearing
- When the grease gun handle becomes difficult to move
- When grease comes out of the connection between the coupler and the grease
fitting - ANSWERS-When old grease begins to flow out of the bearing
, Which qualitative description corresponds with an NLGI number of 2?
- Hard, like the lead of a pencil
- Medium, like jelly
- Soft, similar to hair gel
- Partly fluid, similar to honey - ANSWERS-Soft, similar to hair gel
The most harmful act a maintenance person can do to this component is to get
dirt in it.
- Coupling
- Gear
- Bearing
- Belt - ANSWERS-Bearing
Zerk fittings are used to lubricate __________.
- Single bearings
- Motor shafts
- Automatic systems
- Oil spray systems - ANSWERS-Single bearings
Three qualities used when specifying grease are: water resistance, hardness, and
__________.
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller Teacher101. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $17.99. You're not tied to anything after your purchase.