CAL/ FIRE PUMP EXAM PREPARATION
ACTUAL EXAM WITH COMPLETE
QUESTIONS AND DETAILED VERIFIED
ANSWERS GRADED A+ | 100% VERIFIED
24. What can be substituted for the normal starting procedure
of the weekly test of the fire pump assemblies - ✔✔✔ Correct
Answer > An automatic weekly test timer
25.During the weekly fire pump, test what pressure gauge
readings should be recorded. - ✔✔✔ Correct Answer > Suction
and discharge pressures
26. Pump packing plants should have ____ - ✔✔✔ Correct
Answer > Slight discharge of water
27. During the weekly test of the fire pump, assemblies, one
must observe the time it takes for the motor to accelerate to. -
✔✔✔ Correct Answer > Full speed
,28. During the weekly check of the electrical system what is
recorded after starting the pump to check the automatic stop
controller. - ✔✔✔ Correct Answer > The time pump runs after
starting
29. A weekly fire pump test should be started automatically. -
✔✔✔ Correct Answer > True
30. When preparing the pump system for the weekly fire pump
test, the ____must be shut off. - ✔✔✔ Correct Answer > Valve
on the palms discharge side
31. Test results and evaluation. The interpretation of the test
results shall be the basis of determination of. The_____ of the
pump assembly - ✔✔✔ Correct Answer > Performance
32. Increasing the engine speed beyond the rated speed of the
pump at rated conditions is an acceptable method for meeting
the rated palms performance. - ✔✔✔ Correct Answer > False
33. Test results shall be recorded and retain for comparison,
purposes in accordance with section 4.3 original records shall
be retained for. - ✔✔✔ Correct Answer > The life of the system
, 34. All time delay intervals associated with the
pumps_______shall be recorded. - ✔✔✔ Correct Answer >
Starting, stopping and energy source transfers
35. The preventative maintenance program shall be initiated
_____ After the pump assembly has passed acceptance tests -
✔✔✔ Correct Answer > Immediately
36. According to table 8.5.3 summary of fire pump, inspections,
testing, and maintenance oil level is what type of inspection. -
✔✔✔ Correct Answer > Visual and check
37. According to table 8.5.3 summary of fire pump, inspections,
testing, and maintenance tank float switch is what type of
expections. - ✔✔✔ Correct Answer > Visual and test
38. According to table 8.5.3 summary of fire pump expections,
testing and maintenance inspecting fuel and water in a system
is what type of inspection. - ✔✔✔ Correct Answer > Check and
clean
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller NurseTony. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $18.99. You're not tied to anything after your purchase.
