Exam (elaborations)
26301-20 - Load Calculations: Questions & A+ Answers
- Course
- Institution
26301-20 - Load Calculations: Questions & A+ Answers
[Show more]
Content preview
26301-20 - Load Calculations: Questions & A+ AnswersHow long does a load operate to be determined continuous and what % is it
figured at? Right Ans - 3 hours; 125%
What NEC table is used for calculating lighting loads in non-dwelling
occupancies, expressed as a units per square foot? Right Ans - 220.12
How many VA are required by 2020 NEC for lighting in a 10,500 sq. ft. library?
Right Ans - 15,750 VA
What is the square root of 3? Right Ans - 1.732
What percentage are Noncontinuous loads factored as? Right Ans - 100%
What percentage are Continuous loads factored as? Right Ans - 125%
If a utilization equipment is fastened in place and connected to other loads,
the fastened in place equipment cannot exceed _______ of the branch circuit
ampere rating? Right Ans - 50%
What NEC Table covers conductor adjustment factors for more than 3
conductors in a conduit? Right Ans - 310.15 (C)(1)
What NEC Table covers temperature correction factors based upon ambient
temperatures higher than 30°C (86°F) Right Ans - 310.15(B)(1)
What NEC Table covers the ampacities of insulated conductors when not more
than 3 current carrying conductors? Right Ans - 310.16
Based on 2002 NEC Table 310.15(C)(1), What is the adjustment factor for the
11 current carrying conductors in a raceway? Right Ans - 50
What is the derating factor of a 75℃ rated conductor in an ambient
temperature of 58℉? Right Ans - 1.15
What is the following Formula: 2 x L x R x I / 1,000? Right Ans - Voltage
drop for single phase circuits using conductor resistance
, In the formula 2 x L x K x 1/CM, what does K stand for? Right Ans - A
mathematical constant for resistance depending on conductor material
What is the difference between the single phase and three phase voltage drop
formulas? Right Ans - Single phase uses the number 2, three phase uses √3
Which section in the 2020 NEC can you find the area of a conductor used for
voltage drop? Right Ans - Chapter 9 Table 8
Using the CM formula, What % VD is present on a 1∅, 240v, 50A circuit using
#4 CU for 250'? Right Ans - 3.21%
What is the total load center length for the following loads- LOAD 1= 80'x
100A, LOAD 2= 75' x 150A, LOAD 3= 50' x 175A? Right Ans - 65.88'
What is the minimum size conductor will be used for a 3∅,208v, 65A circuit at
350' to not exceed 3% VD? Right Ans - #1 AWG
What is the total ampacity of a 120v 1∅ circuit with 3 - 250 VA loads that run
for 5 hours and 6- 2.5amp loads that run intermittently? Right Ans - 22.8 A
What is the required circuit ampacity for a 5,400 W, 480 V, 3∅ load? Right
Ans - 6.49 A
What is the ampacity of a 480v 10.5 kW continuous load? Right Ans - 16 A
How do you determine VA? Right Ans - Both A & C
How can you determine Amperage from VA? Right Ans - Divide VA by
Voltage
What NEC section covers loads for recessed lighting fixtures? Right Ans -
220.14 (D)
Using the 2020 NEC, which code section gives you the VA for a 120v
receptacle? Right Ans - 220.14 (I)
How many duplex receptacles can be connected on a 20A 120v circuit
Right Ans - 13
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller LeCrae. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $9.99. You're not tied to anything after your purchase.
Can Stuvia be trusted?
4.6 stars on Google & Trustpilot (+1000 reviews)
66579 documents were sold in the last 30 days
Founded in 2010, the go-to place to buy study notes for 14 years now