Wood Technology Safety ACTUAL Questions and CORRECT Answers
0 view 0 purchase
Course
Wood Technology
Institution
Wood Technology
Wood Technology Safety ACTUAL
Questions and CORRECT Answers
Safety Rules - CORRECT ANSWER- 1. Students will wear safety glasses at all times in
the shop are.
2. Loose clothing must be securely fastened or removed before turning on the power- shirt
tails tucked in and long sleeves buttoned o...
Wood Technology Safety ACTUAL
Questions and CORRECT Answers
Safety Rules - CORRECT ANSWER✔✔- 1. Students will wear safety glasses at all times in
the shop are.
2. Loose clothing must be securely fastened or removed before turning on the power- shirt
tails tucked in and long sleeves buttoned or rolled up.
3. Headbands will be worn to keep long hair from being caught in the machines.
4. HORSEPLAY can be the cause of a serious accident and is NEVER permitted in the shop.
5. Keep in mind that SAFETY is not a set of rules but rather basic COMMON SENSE that
must be practiced 100% of the time to avoid and prevent accidents.
Jointer - CORRECT ANSWER✔✔- 1. Do not join stock that is shorter 12".
2. Never permit your hands to pass over the cutterhead.
3. Round stock may never be jointed.
4. Cutting depth is no more than 1/16".
5. The GUARD MUST BE USED at all times.
6. Use a push-stick or shoe when joining the face and also narrow boards.
7. Do not join end grain or cross grain.
8. Proper hand location-
Left- Thumb on top of the board w/ fingers along the face keeping it square
Right- Edge of the board between your thumb and first finger
Planer - CORRECT ANSWER✔✔- 1. Do not plane wood that is less than 1/4" thick.
2. Do not plane stock that is shorter than 12" long.
3. Do not plane across the grain of the board.
4.After each cut the table can be raised one half turn of the hand lever located on the side of
the machine.
5. TURN EXHAUST ON BEFORE OPERATING EQUIPMENT.
6. If the machine begins to stall:
A. turn the power off
B. after the machine has stopped; turn down the table and remove the stock
, Table Saw - CORRECT ANSWER✔✔- 1. The saw guard must be used.
2. The blade should be no more than 1/4" above the lumber.
3. Always keep fingers clear of the saw line.
4. Do not cut round stock on this machine.
5. Do not use the fence and the miter gauge together.
6. Do not stand behind the saw when it is being used.
7. Do not back out of a cut.
8. If the saw jams, do not let go of the stock. Shut off the machine or call for help.
9. Do not rip lumber on the table saw, use the band saw.
10. The DUBBY JIG is a brand for a special miter gauge.
Arm Saw - CORRECT ANSWER✔✔- 1. Maintain a 6" safety zone on both sides of the
blade.
Bandsaw - CORRECT ANSWER✔✔- 1. Keep fingers and hand out of the kerf line at all.
2. No one should stand to the right of the saw while it is running.
3. Small curves should be cut w/ a thin blade.
4. Round stock must be clamped in a locking device.
5. No adjustments are made while the saw is running.
6. The saw guide should be adjusted 1/4" above the wood.
7. When the saw has stopped gently lower the saw guide to the table.
8. Thick lumber must be cut at a slow pace.
9. Use relief cuts when necessary.
Belt Sander - CORRECT ANSWER✔✔- 1. The belt must track in the middle of the drum.
2. Small pieces should be held in a clamp or jig.
3. Support work against the table.
4. The table should be close to the platen so your finger does not get stuck, less than 1/4".
5. To prevent burning, move the wood back and forth along the table.
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller MGRADES. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $9.99. You're not tied to anything after your purchase.
