CSIA 250 Chapter 5 Questions and Answers
Listed on the right are various connections between networking devices. For each connection, drag a cable type from the left to match it with the connection type.
*Connect a workstation to a switch - Ethernet straight-through cable
*Connect a workstation ...
CSIA 250 Chapter 5 Questions and
Answers
Listed on the right are various connections between networking devices. For each
connection, drag a cable type from the left to match it with the connection type. - answer
*Connect a workstation to a switch - Ethernet straight-through cable
*Connect a workstation to the console port on a Cisco device - Rollover cable
*Connect a hub to a switch - Ethernet crossover cable
*Connect a router to a switch - Ethernet straight-through cable
*Connect a switch to a switch - Ethernet crossover cable
*Connect a workstation to a router - Ethernet crossover cable
Each connection in the Exhibit is labeled A-G. Drag the cable type from the left that you
would use to make each connection type. - answer *Connection A - Ethernet
Straight-through cable
*Connection B - Ethernet crossover cable
*Connection C - Ethernet Straight-through cable
*Connection D - Rollover cable
*Connection E - Ethernet crossover cable
*Connection F - Ethernet Straight-through cable
*Connection G - Ethernet crossover cable
You are a field technician for a large company. You have been sent to a remote site to
troubleshoot a downed router. When you arrive at the remote site, how will you connect
your laptop to the router? (Select two.) - answer *Connect the laptop's COM port to
the router's console port using a rollover cable.
*Connect the laptop's Ethernet port to the router's Ethernet port using a crossover cable
Shown here is a diagram of the back of a sample router. If Port C is the console port,
what type of cable and connector would you use to connect to the console port? -
answer RJ-45 rollover cable
You need to connect a PC to the router console port to establish a console connection.
For each of the parameters listed below, select the appropriate parameter to establish
the connection. - answer *Baud rate - 9600
*Data - 8 bit
*Parity - None
*Stop - 1 bit
*Flow control - None
You want to make a console connection to a router using the serial port on a PC. Select
the necessary components to make the console connection. Select only the necessary
components. - answer Components:
, *Rollover cable
*Console port
*Terminal emulation program
You want to establish a console session to a new router using a Telnet session. Which
of the following components will you need? (Select three.) - answer *Ethernet cable
*Ethernet port
*IP address
When the router boots, it looks for the IOS image in the following locations:
*ROM
*Flash
*Locations specified by the boot system statement in startup-config
*Default TFTP server.
In what order are these locations checked? - answer boot system statements, flash,
TFTP server, ROM
Which items are held in a router's RAM? (Select three.) - answer *The current router
configuration file
*Log file entries
*Routing table entries
Which can be stored in NVRAM on a Cisco device? (Select two.) - answer *startup-
config file
*full IOS image
Which of the following is true of the system ROM on a Cisco device? - answer It
holds a limited version of the IOS software to be used if the full IOS image can't be
found.
A Cisco router boots but cannot locate the startup-config file. Assuming the default
configuration, what will the router do next? - answer Enter setup mode
A Cisco router boots but cannot locate a valid IOS image in flash memory or on TFTP
server. Assuming the default configuration, what will the router do next? - answer
Enter ROM monitor mode
You want to save the configuration file in NVRAM to a TFTP server with address
192.168.1.10 to be used as a backup. Which command would you use? - answer
copy start tftp
Which two of the following commands can you use to copy files from a TFTP server with
address 10.0.0.5 to a router? - answer *copy tftp start
*copy tftp run
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller Pogba119. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $12.99. You're not tied to anything after your purchase.
