CWB level 3 Module 21 practice questions & Answers(RATED A)
0 view 0 purchase
Course
CWB level 3 Module 21
Institution
CWB Level 3 Module 21
The maximum solubility of carbon in a iron is:
(a) 2%.
(b) 0.002%.
(c) 0.02%.
(d) There is no solubility. - ANSWER(c) 0.02%.
True or false?
When a steel is heated into the austenite region, all carbon and most other compounds dissolve
to form a single phase. - ANSWERTrue
True or false?
...
CWB level 3 Module 21 practice
questions & Answers(RATED A)
The maximum solubility of carbon in a iron is:
(a) 2%.
(b) 0.002%.
(c) 0.02%.
(d) There is no solubility. - ANSWER(c) 0.02%.
True or false?
When a steel is heated into the austenite region, all carbon and most other
compounds dissolve
to form a single phase. - ANSWERTrue
True or false?
Pearlite is a single phase. - ANSWERFalse
What is the resulting structure of a 0.6% carbon steel slowly cooled from 900°C to
room
temperature? - ANSWERAbout 25% proeutectoid ferrite and 75% pearlite
Most fine grain steels retain their fine grains: (
(a) up to the melting temperature.
(b) up to the grain coarsening temperature, but above that behave as coarse grain
steel. C
(c) only up to the transformation temperature. - ANSWER(b)
Why is martensite produced rather than pearlite when a
steel is rapidly quenched from, 900°C? - ANSWERInsufficient time for carbon to
diffuse to form carbides
The hardness of martensite depends mainly on the:
(a) alloy content.
(b) rate of cooling.
(c) carbon content.
(d) size of the part. - ANSWER(c)
Can bainite normally be produced in continuous cooling of a plain carbon steel? -
ANSWERNo
Increasing the carbon content:
(a) lowers the martensite start temperature M.
(b) raises the M.
(c) has no effect on M. - ANSWER(a) lowers the martensite start temperature M.
Calculate the ideal critical diameter (hardenability) for a steel with 0.2%C, 0.25%Si, 1
.0%Mn,
, 0.5%Cr, 0.5%Mo, 1.0%Ni (assume an initial grain size of ASTM 8). Use section 2.5.3
and 2.5.4
as a reference. - ANSWER5.0
4. If a thermal stress relief is applied to a welded quenched and tempered steel, the
temperature
should not exceed the:
(a) transformation temperature.
(b) original tempering temperature.
(c) grain coarsening temperature. - ANSWER(b) original tempering temperature.
The effect of increasing the carbon content of a steel on the Charpy transition curve
is to:
(a) lower the transition temperature.
(b) raise the upper shelf.
(c) raise the transition temperature and lower the upper shelf. - ANSWER(c) raise
the transition temperature and lower the upper shelf.
Using Figure 2.34, estimate the fastest rate a weld could cool without the HAZ
becoming
harder than 350 HV for a
steel of 0.2%C, 0.18%Si, t2%Mn, 0.35%Cr. - ANSWER30C/s at 540 C
What happens to the carbon trapped in the tetragonal structure when martensite is
tempered? - ANSWERThe carbon is released
Secondary hardening during tempering results from:
(a) retained austenite.
(b) a slow heating rate.
(c) the presence of strong carbide formers. - ANSWER(c) the presence of strong
carbide formers.
What simple heat treatment is widely used to improve the toughness of structural
steels? - ANSWERNormalizing
If plates are deformed more than 5% during fabrication, the simple heat treatment
often
specified to restore ductility is:
(a) a full furnace anneal at 900°C.
(b) normalization.
(c) stress relief, typically at 635°C. - ANSWER(c) stress relief, typically at 635°C.
The main purpose of using a lower finishing temperature during controlled rolling of
steel is to:
(a) limit re-growth of austenite grains.
(b) allow time for precipitates to dissolve.
(c) reduce the force necessary for rolling. - ANSWER(a) limit re-growth of austenite
grains.
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller papersbyjol. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $12.99. You're not tied to anything after your purchase.
