NACE CIP Level 1 Sample Quizes Questions
With Answers 100% Correct
The anode is the part of the metal that corrodes
General corrosion is described as uniform loss of thickness over the exposed surface
In order to reach consensus and to resolve conflict on the job, the NACE Inspector's preferre...
General corrosion is described as uniform loss of thickness over the exposed surface
In order to reach consensus and to resolve conflict on the job, the NACE Inspector's preferred
course of action is to actively listen and endeavor to understand the postions of others.
A proper coating specification should contain information regarding surface preparation
standards, safety, locations to be coated
According to the NACE attestation, it's OK to accept a gift from a contractor as long as the gift is
below the value identified in your company policy. false
If an inspector finds discrepancies between the specification and the coating manufacturers
technical data sheet, the preferred coarse of action is to seek written clarification from the
specifier
,NACE CIP Level 1 Sample Quizes Questions
With Answers 100% Correct
All of the following are generally included within inspection reports EXCEPT cost
information
Inspectors reports provide sufficient detail permitting the owner to evaluate contractor's
performance, inspector's performance, job progress, work interruptions
When applying coatings, instruction regarding appropriate types of Personal Protection
Equipment (PPE) will always be found within the material safety data sheet (MSDS) or
safety data sheet (SDS)
Material inventory report should contain all of the following EXCEPT overall cost of
materials
Safety enforcement is one of the primary responsibilities of the coating inspector false
If the relative humidity is too high, solvent entrapment within the coating film may occur.
true
, NACE CIP Level 1 Sample Quizes Questions
With Answers 100% Correct
The dew point is the temperature at which moisture condenses on a surface.
Steel surface temperature reading should be taken at the actual work locations
The coatings inspector must calibrate the magnetic surface thermometer at the job site.
False
If solvent is trapped in a coating film it may cause problems with the curing of the film.
Electronic Surface Contact Thermometers do not require stabilization prior to use
MOST coatings in the industrial and marine field are inorganic coatings? False
The predominant pigment in sacrificial coating is zinc
The vehicle of a coating consists of solvent, binder, and liquid additivess
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller UpperClass. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $16.99. You're not tied to anything after your purchase.
