1. Acceptance requirements - ANS-all merchandise *must* meet the necessities set by way
of the contract, engineering files, relevant standards, and Product Class requirements
2. cold solder connection - ANS-exhibits negative wetting;
3. characterised by means of gray, porous appearance;
4. **Not Caused by Motion**
5. commonplace conductors - ANS-conductors that have same or redundant capabilities
6. conductor diameter - ANS-outdoor cord diameter *not together with* insulation
7. electric clearance - ANS-minimal spacing between noncommon uninsulated conductors;
8. see *Appendix A*
9. engineering documentation - ANS-any documents that set up layout and layout
necessities
10. FOD - ANS-Foreign Object Debris
11. depend overseas to the assembly or device
12. Form/Fit/Function - ANS-identifying characteristic that if no longer met might negatively
impact the functionality of an assembly
13. excessive voltage - ANS-should be exact or asked by means of User/Customer;
14. calls for special interest to arc potentials due to high voltage inflicting high danger of
arcing;
15. *no sharp edges*
16. inspection technique - ANS-take delivery of/reject choices must be based on necessities
set via settlement, drawings, specification and referenced files;
17. non-visible inspection techniques should be agreed upon among Manufacturer and
User;
18. Inspector have to inspect to class detailed by way of User
19. intrusive solder - ANS-solder paste carried out the usage of stencil or syringe to
accommodate through-hole components which might be hooked up and reflow-soldered
together with surface mount additives
20. kink - ANS-too tight or too sharp bend in twine; can not be removed through
straightening
21. Lighting - ANS-should be ok for characteristic being inspected;
22. as a minimum 1000 lux, decided on to prevent shadows
23. locking mechanism - ANS-prevents loosening or disconnecting of mated elements
24. magnification aids - ANS-Tables 1-2, 1-3, 1-four on pages 1-7, 1-8For assemblies with
blended land sizes, the more magnification may be used for the whole assembly.*If the
presence of a defect can't be decided on the magnification power in line with Tables 1-2,
1-3, 1-four, then the object is suitable.*
25. Manufacturer - ANS-accountable for component assembly;
26. liable for making sure part absolutely complies to IPC-A--610
27. Meniscus - ANS-thing coating that extends beyond the seating aircraft of the aspect
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller Ashley96. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $12.99. You're not tied to anything after your purchase.
