CDFA Measurement Verification Exam 100% Verified
Define accurate - ANSWER a piece pf equipment is "accurate" when its performance or
value conforms to the standard within applicable tolerances and other performance
requirements.
"accurate" dos not mean "correct"
What is the Statute of Limitations on a misdemeanor - ANSWER 1 year
What do you apply tolerances to when testing retail motor fuel - ANSWER each draft
What is a maintenance tolerance on a full load test - ANSWER 2%
What is the practical unit of electrical resistance - ANSWER ohm
The rotor or indicator for a meter shall rotate or increment continuously when a load is
applied equally to _________? - ANSWER 0.5 ampere
Handbook 44
Appendix C - General Tables of Units of Measurement - ANSWER 1 oz
1 gill
1 pint
1 quart
1 gallon
1 cubic inch
1 cubic foot
1 milliliter
, 1 liter
In testing a vehicle tank meter, the minimum test draft for a "normal" test shall be
_______? - ANSWER The amount delivered in one minute at max flow or 50 gallons,
whichever is more
Meter indicating more than actual delivery. - ANSWER under registration
A meter indication less than actual delivery - ANSWER over registration
Testing on animal euthanistic devices should occur in what frequency - ANSWER
semiannually (every 6 months)
The smallest unit allowed on a wholesale LPG device is - ANSWER 1 gallon or 1 liter
The smallest unit allowed on retail LPG devices is - ANSWER 1/10 of a gallon or liter
Sale of LPG in amounts over 5 gal is by - ANSWER either weight or volume
Cryogenic devices uses what kind of delivery hose - ANSWER dry hose
LPG devices use what type of delivery hose - ANSWER wet hose
The minimum height of the lettering on an LPG price sign is - ANSWER 3/4 inches
What should the drain time be after a 5 gallon test on a retail motor fuel pump - ANSWER
10 seconds
Define "correct" - ANSWER a device that meets all tolerance and specification
Define accurate - ANSWER a piece pf equipment is "accurate" when its performance or
value conforms to the standard within applicable tolerances and other performance
requirements.
"accurate" dos not mean "correct"
What is the Statute of Limitations on a misdemeanor - ANSWER 1 year
What do you apply tolerances to when testing retail motor fuel - ANSWER each draft
What is a maintenance tolerance on a full load test - ANSWER 2%
What is the practical unit of electrical resistance - ANSWER ohm
The rotor or indicator for a meter shall rotate or increment continuously when a load is
applied equally to _________? - ANSWER 0.5 ampere
Handbook 44
Appendix C - General Tables of Units of Measurement - ANSWER 1 oz
1 gill
1 pint
1 quart
1 gallon
1 cubic inch
1 cubic foot
1 milliliter
, 1 liter
In testing a vehicle tank meter, the minimum test draft for a "normal" test shall be
_______? - ANSWER The amount delivered in one minute at max flow or 50 gallons,
whichever is more
Meter indicating more than actual delivery. - ANSWER under registration
A meter indication less than actual delivery - ANSWER over registration
Testing on animal euthanistic devices should occur in what frequency - ANSWER
semiannually (every 6 months)
The smallest unit allowed on a wholesale LPG device is - ANSWER 1 gallon or 1 liter
The smallest unit allowed on retail LPG devices is - ANSWER 1/10 of a gallon or liter
Sale of LPG in amounts over 5 gal is by - ANSWER either weight or volume
Cryogenic devices uses what kind of delivery hose - ANSWER dry hose
LPG devices use what type of delivery hose - ANSWER wet hose
The minimum height of the lettering on an LPG price sign is - ANSWER 3/4 inches
What should the drain time be after a 5 gallon test on a retail motor fuel pump - ANSWER
10 seconds
Define "correct" - ANSWER a device that meets all tolerance and specification
