100% satisfaction guarantee Immediately available after payment Both online and in PDF No strings attached
logo-home
Previously searched by you
Previously searched by you
logo
Mechanics exam neiep 2025 ,,,,, 386 ,,,,, questions with verified correct answers 100% guaranteed pass $17.99
Add to cart
Quickly navigate to
Preview
  2.  
  3. Liberty University
  4.  
  5. Elevator Mechanic

Exam (elaborations)

Mechanics exam neiep 2025 ,,,,, 386 ,,,,, questions with verified correct answers 100% guaranteed pass
 0 purchase

Mechanics exam neiep 2025 ,,,,, 386 ,,,,, questions with verified correct answers 100% guaranteed pass

Preview 3 out of 23  pages

Document information

  • January 26, 2025
  • 23
  • 2024/2025
  • Exam (elaborations)
  • Questions & answers

Subjects

  • mechanics exam neiep questions

Written for

All documents for this subject (43)

Seller

avatar-seller
JOHNMARK01

Reviews received

Content preview

Mechanics Exam NEIEP

1. What is the time constant for a circuit with 150KOhms and a 2 microfarad
capacitor?: .3 seconds
2. What must be done before checking pump drive belts on a hydraulic
elevator: Pull the main disconnect switch
3. Which of the following best describes the danger posed be the
counterweight assembly when you are riding the car top?: It run close by
in the opposite direction
4. Why must you place a hydraulic elevator car on jack posts before
servicing the packing head?: Because a hydraulic elevator is supported by a
column of oil.
5. Why can't Elevator Constructors use a metal ladder?: Metal ladders
conduct electricity
6. What is the function of a Ground Fault Circuit Interrupter?: To detect and
imbalance in current between the hot and nuetral wires
7. How do you determine the correct angle from the vertical for placing a
ladder: Measure out a distance of 1/4 the height.
8. Who is required to furnish you the necessary safety equipment?: Your
employer
9. What device must be in working condition in order to use an elevator car
sling as a running platform: The governor and safeties.
10. What hazardous condition can occur if the weight of the temporary car
and counterweight are not kept nearly equal?: Traction could be lost
11. What is the name of the document that lists the hazards of a substance?-
: Material Safety Data Sheet or Safety Data Sheet
12. Who is responsible for making sure barricades are kept in place?:
Everyone on the job
13. Who is primarily responsible for your safety on the job?: You, Yourself 1
14. Which agency guarantees your right to a safe workplace?: OSHA
15. Which of the following is not a typical elevator repair?:
16. Which of the following makes a good substitute for a ladder?: Never
substitute anything
17. How should you proceed to et a toolbox to the machine room when
climbing a vertical ladder?: Climb the ladder and pull the box up with a rope
18. What is the safest way to lubricate hoist ropes?: With a rope lubricator
19. What supports a hydraulic elevator?: The column of oil inside the jack




, .
.
20. What is the first thing you must do before performing any service on
an elevator: Place barricades at the upper and lower ends
21. When a roller bearing needs to be pressed onto a shaft, what type
of allowance does the shaft have?: Negative allowance 22. How are
threads specified on metric bolts?:
23 What is the tolerance accepted in the elevator industry?: +- 1/64 24
What type of locking device uses a second nut run up against the first
which flattens when tightened?:
25. How many possible views are there available from drawings using
orthographic projections?:
26. Best Describe Layout Drawings: A mechanical drawing showing plans and
elevation views of the elevator installation
27. What document provides information on the number of doors for an
installation and their color?: Job Abstract
28. What is the purpose of the elevation view found in the final layouts?: To
show vertical locations and dimensions of elevator components.
29. The floor heights for the Wilton Towers are as follows; sub-basement-
10'2"; subbasement to basement-12'5"; basement to lobby-22'8"; lobby
to the 11th floor-120'5"; and to the executive floor-16'5". What is the total
travel for an elevator that travels from ht ebasement floor level to the
executive floor level?: 159' 5"
30. DBG at the top-7' 11 5/32" DBG at the bottom- 7' 10 17/64" What is the
difference?:
31. You have been tasked with unloading 177 boxes from the company truck
and moving them into a storage area. By noon you have moved 103
boxes.
What percentage of the load has been moved?: 58%
32. The counterweight must weigh 40% of the car capacity plus the weight of
the assembled car. If the assembled car weighs 3800 lbs. and has a
capacity of 2500lbs. what must the counterweight weigh?: 5100lbs
33. What is the most important piece of equipment you have when using a
power saw?: Safety Glasses
34. When using a circular saw...: The base is not adjustable for cutting depth.
35. What functions can load weighing transducer perform: Adjust door times,
bypass hall calls, and adjust motor control
36. What prevents manila rope from unraveling?: Whipping




, .
.
37. When using U-bolts...: Place all U-bolt clips with the U shaped portion
bearing on the dead-end of the rope
38. Capstans should be: fastened to building steel or other building structure.
39. To interrupt hoisting on a capstan...: ease off on the pulling rope
40. What type of wrench is used to align the holes for rail installation?: Spud
Wrench
41. What wrench is used to thread pipes with polished surfaces together?:
Strap Wrench
42 Hacksaw Blades: must be installed with the teeth facing forward
43 Metal Ladders: should never be used
44. Tension on the governor rope is maintained by using: a tension sheave
45. ____ should not be disassembled in the field: Oil Buffers
46. The loss of traction created between the hoist ropes and the machine
driver when the counterweight lands on its buffer avoids...: The elevator car
being flung into the overhead
47. When the pit down final limit switch is actuated, the car...: will not run at
all
48. The distance between the counterweight buffer striker plate and the
striking surface of the counterweight buffer when the car floor is level to the
top landing is known as ___: Runby
49. The operation of the down final limit switch will prevent movement of the
car by normal operating devices in...: both directions of travel.
50. The ASME safety code requires oil buffer for elevators when traveling at
a car speed of...: over 200 fpm
51. How are the ends of the rails made so they may be joined together?: The
ends have a tongue and groove
52. What is the main link between the hoistway walls or building structural
steel and the rails?: Rail Brackets
53. You are responsible for storing 64 standard 15lb T rails on one of the
floors of a highrise building. What is the total weight it will put on the
floor where it will be stored?: 15,360lbs
54. You are on a T-rail job and have been told to stagger them. What should
be done?: One side of the installed rail job has the groove up, while the other
side has the tongue up.
55. If the distanve between the face of the two T-rail brckets (DBB) is 8' 11"
what is the back to back guide distance?: 8' 10 1/2"

The benefits of buying summaries with Stuvia:

Guaranteed quality through customer reviews

Guaranteed quality through customer reviews

Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.

Quick and easy check-out

Quick and easy check-out

You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.

Focus on what matters

Focus on what matters

Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!

Frequently asked questions

What do I get when I buy this document?

You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.

Satisfaction guarantee: how does it work?

Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.

Who am I buying these notes from?

Stuvia is a marketplace, so you are not buying this document from us, but from seller JOHNMARK01. Stuvia facilitates payment to the seller.

Will I be stuck with a subscription?

No, you only buy these notes for $17.99. You're not tied to anything after your purchase.

Can Stuvia be trusted?

4.6 stars on Google & Trustpilot (+1000 reviews)

66662 documents were sold in the last 30 days

Founded in 2010, the go-to place to buy study notes for 15 years now

Start selling
$17.99
  • (0)
Add to cart
Added