CPSI EXAM NEWEST 2025 ACTUAL EXAM
COMPLETE 104 QUESTIONS AND CORRECT
DETAILED ANSWERS (VERIFIED ANSWERS)
Designated play surface - minimum width and length <30 degrees from horizontal - ✔✔2 in
Force requirements for non-rigid openings (applied to head or torso) - ✔✔50 lbs
Non-rigid component suspended between two play units or between play unit and ground
within 45 degrees of horizontal - minimum height - ✔✔84 in
Non-rigid component suspended between two play units or between play unit and ground
within 45 degrees of horizontal - minimum diameter - ✔✔1 in
Crush and Shear Probe - for common hazards neoprene rod diameter - ✔✔0.62 in (5/8")
Ground-level flexible manipulative components - maximum connector length - ✔✔24 in
Ground-level flexible manipulative play components - max. attachment height - ✔✔27 in
Head probe - diameter - ✔✔9 in
Small projection gauge - height - ✔✔0.25 in
Small projection gauge - inside diameter - ✔✔0.5 in
Small projection gauge - outside diameter - ✔✔1 in
, Middle Projection Gauge - height - ✔✔0.75 in
Middle Projection Gauge - inside diameter - ✔✔1.50 in
Middle projection gauge - outside diameter - ✔✔2 in
Large projection gauge - height - ✔✔1.5 in
Large Projection Gauge - inside diameter - ✔✔3 in
Large projection gauge - outside diameter - ✔✔3.5 in
Partially bounded opening probe - neck length - ✔✔3 in
Partially bounded opening probe - neck width - ✔✔1.875 in
Partially bounded opening probe (A) - width - ✔✔6.1 in
Partially bounded opening probe (B) - shoulder width - ✔✔9 in
Partially bounded opening probe (B) - thickness - ✔✔0.75 in
Rope, cable, or chain attached at one end - maximum length allowable - ✔✔7 in
S-hook - maximum opening - ✔✔0.04 in
COMPLETE 104 QUESTIONS AND CORRECT
DETAILED ANSWERS (VERIFIED ANSWERS)
Designated play surface - minimum width and length <30 degrees from horizontal - ✔✔2 in
Force requirements for non-rigid openings (applied to head or torso) - ✔✔50 lbs
Non-rigid component suspended between two play units or between play unit and ground
within 45 degrees of horizontal - minimum height - ✔✔84 in
Non-rigid component suspended between two play units or between play unit and ground
within 45 degrees of horizontal - minimum diameter - ✔✔1 in
Crush and Shear Probe - for common hazards neoprene rod diameter - ✔✔0.62 in (5/8")
Ground-level flexible manipulative components - maximum connector length - ✔✔24 in
Ground-level flexible manipulative play components - max. attachment height - ✔✔27 in
Head probe - diameter - ✔✔9 in
Small projection gauge - height - ✔✔0.25 in
Small projection gauge - inside diameter - ✔✔0.5 in
Small projection gauge - outside diameter - ✔✔1 in
, Middle Projection Gauge - height - ✔✔0.75 in
Middle Projection Gauge - inside diameter - ✔✔1.50 in
Middle projection gauge - outside diameter - ✔✔2 in
Large projection gauge - height - ✔✔1.5 in
Large Projection Gauge - inside diameter - ✔✔3 in
Large projection gauge - outside diameter - ✔✔3.5 in
Partially bounded opening probe - neck length - ✔✔3 in
Partially bounded opening probe - neck width - ✔✔1.875 in
Partially bounded opening probe (A) - width - ✔✔6.1 in
Partially bounded opening probe (B) - shoulder width - ✔✔9 in
Partially bounded opening probe (B) - thickness - ✔✔0.75 in
Rope, cable, or chain attached at one end - maximum length allowable - ✔✔7 in
S-hook - maximum opening - ✔✔0.04 in
