Ase a5 test 2025 - Study guides, Class notes & Summaries

ASE A5 Practice Test Questions and Answers 1. On a car with disc/drum brakes, the front brakes grab quickly when light pedal pressure is applied. This problem could be caused by a bad: A. proportioning valve B. pressure safety switch C. metering valve D. residual check valve - Ans:-C 2. The driver of a vehicle with power disc/drum brakes says that the brake pedal moves slowly to the floor while maintaining pedal pressure at a stoplight. What could cause this problem? ©GRACEAMELIA 2...

ASE BRAKES A5 TEST EXAMS 1, 2, AND 3 | ALL QUESTIONS AND CORRECT ANSWERS | GRADED A+ | VERIFIED ANSWERS | LATEST VERSION

ASE A5 Practice Test (Brakes) | Questions and Correct Answers | Latest Update 2024/2025 A spongy brake pedal may be caused by: a. ABS Diagnostic Trouble Code set b. Frozen caliper piston c. Defective metering valve. d. Air in hydraulic system - Answer -D This question is not like the others. It has the word EXCEPT. For this question, look for the choice that could NOT cause the described situation. Read the entire question carefully before choosing your answer. A vehicle has a very er...

ASE Brakes A5 Test ( Exam 2 ) Study Questions and Answers The brakes are dragging on a vehicle. this could be cause by a. overfilled master cylinder reservoir b. low vacuum to the boost c. bypassing master cylinder d. quick take-up valve stuck open - Ans:-A : overfilled master cylinder reservoir why : an overfilled master cylinder reservoir cylinder would not allow for fluid expansion. this would cause the brakes to self apply as the fluid expanded as result in brake drag The brake pads...

ASE A5 Practice Test - ASE A5 Brakes Test Prep - Test Prep 2 Practice Questions and Answers Technician A - Ans:-A front wheel drive vehicle with four wheel disc brakes is pulling to the left. Technician A says an external kink or internal restriction in the LF brake line will result in this condition. Technician B says to use a compression fitting to repair a section of brake line. Who is correct? A. Technician A B. Technician B C. Both A and B D. Neither A nor B Technician B - Ans:-The...

ASE A5 TEST ...

ASE Test Prep - A5 Brakes - Practice Test #3 Questions and Answers The master cylinder should be bench bled prior to installation - Ans:-When replacing the master cylinder, which of the following is a true statement? A. Wheel cylinders must also be replaced B. The power brake booster should always be replaced at the same time C. Calipers should be replaced as well D. The master cylinder should be bench bled prior to installation Technician B only - Ans:-Technician A says when testing the...

ASE A5 Practice Test Brakes Study Exam Questions and Answers A vehicle with ABS anti-lock brakes has an audible clicking noise when it is first started. The noise goes away after a few seconds. Technician A says this is one of the hydraulic valves in the hydraulic valve assembly sticking. Technician B says this is a normal condition. Who is correct? - Ans:-TECH B is correct. The ABS system runs a system check when the key is first turned to the ON position. The valves sometimes make a clic...

ASE A5 Brakes Practice Test -Section 1- Hydraulic System DIagnosis and Repair Exam Questions and Answers A spongy brake pedal may be caused by: - Ans:-Air in the hydraulic system d - Air causes a gap in the hydraulic fluid flow because the fluid has to compress the air before it can apply the piston. This delay causes the spongy feel. The other choices do not affect this concern. This question is not like the others. It has the word EXCEPT. For this question, look for the choice that coul...

ASE Brakes A5 Test ( Exam 2 ) Practice Questions and Answers The brakes are dragging on a vehicle. this could be cause by a. overfilled master cylinder reservoir b. low vacuum to the boost c. bypassing master cylinder d. quick take-up valve stuck open - Answer️️ -A : overfilled master cylinder reservoir why : an overfilled master cylinder reservoir cylinder would not allow for fluid expansion. this would cause the brakes to self apply as the fluid expanded as result in brake drag ...