Ase brake 2025 - Study guides, Class notes & Summaries

ASE Prep Exam Questions & Answers 2024/2025 A vehicle is brought in with a bent subframe. Technician A says to section the subframe. Technician B says the subframe should not be repaired and must be replaced. Who is right? A, B, Both, or Neither - ANSWERSTechnician B only The subframe should never be sectioned, and should rarely, if ever, be worked. It is typically a bolt-on part that does not lend itself to traditional straightening methods. Vehicle manufacturers recommend replaceme...

ASE BRAKES Exam #1 | Questions and Correct Answers | Latest Update 2024/2025 A - Answer -A drum is chattering on the brake lathe. This could be the result of: A. Failure to install the dampening belt. B. Cutting too slowly. C. Dull cutting blades. D. Cutting speed too fast. C - Answer -A vehicle is equipped with a hydro-boost brake system has a hard pedal with little braking action. Which of the following could be the cause? A. Low brake fluid B. Air in the brake fluid C. Low power...

MLR ASE Test Questions & Answers 2024/2025 Both A and B - ANSWERSTechnician observes that the brake fluid level is at the "Min" mark in the master cylinder reservoir. Tech A says that worn front pads could be the cause. Tech B says that a leak in the brake hydraulic system could be the cause. Who is right? A only - ANSWERSThe tires of a vehicle are being rotated and balanced. Tech A says that the wheel weight retaining clips must be matched to the rim profile. Tech B says that directio...

ASE A5 Practice Test Brakes | Questions and Verified Answers | Latest Update 2024/2025 A vehicle with ABS anti-lock brakes has an audible clicking noise when it is first started. The noise goes away after a few seconds. Technician A says this is one of the hydraulic valves in the hydraulic valve assembly sticking. Technician B says this is a normal condition. Who is correct? - Answer -TECH B is correct. The ABS system runs a system check when the key is first turned to the ON position. T...

ASE A5 Practice Test Questions and Answers 1. On a car with disc/drum brakes, the front brakes grab quickly when light pedal pressure is applied. This problem could be caused by a bad: A. proportioning valve B. pressure safety switch C. metering valve D. residual check valve - Ans:-C 2. The driver of a vehicle with power disc/drum brakes says that the brake pedal moves slowly to the floor while maintaining pedal pressure at a stoplight. What could cause this problem? ©GRACEAMELIA 2...

ASE Brakes A5 ( Exam 3 ) Practice Questions and Answers The goal of burnishing the brakes after a complete brake service is to: a. heat the brake assembly b. cool the brake assembly c. set the wheel assembly d. stretch the brake shoes - Ans:-A : heat the brake assembly why : the brake assemblies are intentionally allowed to get heated during burnishing. this allows the braking materials to cure Refer to the figure ( pg. 67 ) : the internal spring in the wheel cylinder is left out during...

ASE A5 Test | Questions and Correct Answers | Latest Update 2024/2025 1. On a car with disc/drum brakes, the front brakes grab quickly when light pedal pressure is applied. This problem could be caused by a bad: A. proportioning valve B. pressure safety switch C. metering valve D. residual check valve - Answer -1. The correct answer is C. The metering valve delays the flow of brake fluid to the front calipers until the pressure in the system rises to a point where the wheel cylinder ...

ASE Brakes A5 Test ( Exam 2 ) Study Questions and Answers The brakes are dragging on a vehicle. this could be cause by a. overfilled master cylinder reservoir b. low vacuum to the boost c. bypassing master cylinder d. quick take-up valve stuck open - Ans:-A : overfilled master cylinder reservoir why : an overfilled master cylinder reservoir cylinder would not allow for fluid expansion. this would cause the brakes to self apply as the fluid expanded as result in brake drag The brake pads...

BMW Associate level ASE Test Questions and Answers | Latest Version | 2024/2025 | Graded A+ What is the primary purpose of the engine oil in a vehicle? The primary purpose of engine oil is to lubricate moving parts, reduce friction, and help cool the engine. Explain the function of the catalytic converter in an automobile. The catalytic converter reduces harmful emissions by converting toxic gases like carbon monoxide and nitrogen oxides into less harmful substances. What type...

Diesel Tech Brakes ASE Practice Test 2 Practice Questions and Answers Technician A says the same electronic control unit (ECU) operates the antilock braking systems (ABS) on the tractor and the trailer. Technician B says that if replacement tires are a different size from the original tires, the wheel speed sensor signals are affected. Who is correct? A. A only B. B only C. Both A and B D. Neither A nor B - Ans:-B. B only A truck with air brakes and a suspended (fire-mounted) pedal has ...