Ase brake exam 2024 - Study guides, Class notes & Summaries

ASE A2 Exam Review Update 2024 Q’s & A’s What is the purpose of a brake band? - ANS-It stops and holds the drum that is connected to a member of the planetary gearset. What are brake bands made out of? - ANS-Brake bands are flexible steel plates lined with friction material. That material can be organic or semi-metallic. What aids in brake band hear dissipation? - ANS-The friction material absorbs trans fluid. When the brake band tightens around the drum, why doesnt trans fluid get tr...

ASE ASSOCIATE EXAM 2024 WITH 100% ACCURATE SOLUTIONS Brake Pad Minimum Thickness Customer Pay Warranty CPO - ANSWER ☑☑Customer Pay: 3mm Warranty: 4mm (3.9mm) CPO: 5 mm Brake bleed pressure setting (bar): - ANSWER ☑☑2 bar max - Location of MSDS: - ANSWER ☑☑Online CPO test drive (length and distance): - ANSWER ☑☑20 uninterrupted minutes/ 5 continuous miles Caliper bleeding with 2 bleed screws - ANSWER ☑☑Outer bleeder first, then inner - Is pres...

ASE Brakes A5 ( Exam 3 ) Practice Questions and Answers The goal of burnishing the brakes after a complete brake service is to: a. heat the brake assembly b. cool the brake assembly c. set the wheel assembly d. stretch the brake shoes - Ans:-A : heat the brake assembly why : the brake assemblies are intentionally allowed to get heated during burnishing. this allows the braking materials to cure Refer to the figure ( pg. 67 ) : the internal spring in the wheel cylinder is left out during...

ASE BRAKE FINAL CURRENT - EXAM QUESTIONS WITH VERIFIED ANSWERS...

ASE Brakes A5 Test ( Exam 2 ) Study Questions and Answers The brakes are dragging on a vehicle. this could be cause by a. overfilled master cylinder reservoir b. low vacuum to the boost c. bypassing master cylinder d. quick take-up valve stuck open - Ans:-A : overfilled master cylinder reservoir why : an overfilled master cylinder reservoir cylinder would not allow for fluid expansion. this would cause the brakes to self apply as the fluid expanded as result in brake drag The brake pads...

ASE BRAKES Exam #1 Practice Questions and Answers A - Ans:-A drum is chattering on the brake lathe. This could be the result of: A. Failure to install the dampening belt. B. Cutting too slowly. C. Dull cutting blades. D. Cutting speed too fast. C - Ans:-A vehicle is equipped with a hydro-boost brake system has a hard pedal with little braking action. Which of the following could be the cause? A. Low brake fluid B. Air in the brake fluid C. Low power steering fluid D. An overtightened...

(Combined Solutions) ASE Brakes A5 Test ( Exam 1 ), , ASE Brakes A5 ( Exam 3 ), ASE Brakes A5 Test ( Exam 2 ) All With Complete Verified Solutions 2023/2024, With Rationale A drum is chattering on the brake lathe. This could be a result of a. failure to install the dampening belt b. cutting too slowly c. dull cutting blades d. cutting speed too fast A : failure to install the dampening belt why : a missing dampening belt could cause the drum to vibrate while on the lathe. this vibra...

ASE A5 Practice Test Brakes Study Exam Questions and Answers A vehicle with ABS anti-lock brakes has an audible clicking noise when it is first started. The noise goes away after a few seconds. Technician A says this is one of the hydraulic valves in the hydraulic valve assembly sticking. Technician B says this is a normal condition. Who is correct? - Ans:-TECH B is correct. The ABS system runs a system check when the key is first turned to the ON position. The valves sometimes make a clic...

(PACKAGE DEAL) ASE BRAKES Exam 1,2,3,4,5 and 6 All with complete solutions, All Questions With Correct Answers 2023/2024 ASE BRAKES Exam #1 A A drum is chattering on the brake lathe. This could be the result of: A. Failure to install the dampening belt. B. Cutting too slowly. C. Dull cutting blades. D. Cutting speed too fast. C A vehicle is equipped with a hydro-boost brake system has a hard pedal with little braking action. Which of the following could be the cause? A. Low brake f...

ASE MLR EXAM PRACTICE QUESTIONS AND ANSWERS Tech observes that the brake fluid level is at the "Min" mark in the master cylinder reservoir. Tech A says that worn front pads could be the cause. Tech B says that a leak in the brake hydraulic system could be the cause. Who is right? (1) - Ans:-Both A and B (1) The tires of a vehicle are being rotated and balanced. Tech A says that the wheel weight retaining clips must be matched to the rim profile. Tech B says that the directional tires...