Asme section 9 - Study guides, Class notes & Summaries

Massachusetts 2a Hoisting License Questions And Answers Latest Updated 2024/2025 | Scored A+. What is the purpose of the swing gear on an excavator: answer- It connects the car body to the tracks 2. Who is responisble for inspecting a trench before anyone goes in it: answer- The equipment operator 3. What is the prefered sling angle: answer- 60* 4. The top of the spoil pile is called: answer- The crown 5. A four footbdeep trench requires an additional ladder for each _ of open trench: ans...

Massachusetts 1A Hoisting License Exam Questions and Answers Latest Updated 2024/2025 | Scored A+. Where should a license or temporary permit be located during time of operation of equipment:  Shall be carried ON the person at all times; in the case of a temporary permit the person shall also carry their drivers license 2. Whats the fine for violating section 53, 53a or 54:  No less than $500 and no more than $3,000, or by imprisonment of no more than 3 months, or both fin...

API-510 Closed Book (Verified on test) 100% Solved If a welder has qualified in the shielded metal arc welding, submerged arc welding, and gas tungsten arc welding processes but has welded in only one of them, qualification for the other 2 processes remains valid: A: for 6 months B: for 1 year C: for 2 years D: Indefinitely - Answer- A: for 6 months One purpose of reviewing previous inspection reports is to ensure that: A: Estimated corrosion rates for new equipment are accurate B: Pre...

Massachusetts 1A Hoisting License Questions and Answers Updated 2024/2025 | Graded A+. Whats the fine for violating section 53, 53a or 54:  No less than $500 and no more than $3,000, or by imprisonment of no more than 3 months, or both fine and imprisonment 3. Whats the fine for permitting an unlicensed person to operate machinery: -  No less than $1,000 and no more than $3,000, or imprisonment of no more than 3 months, or both fine and imprisonment 4. Whats the fine for ...

Massachusetts 1A Hoisting License Questions and Answers Updated 2024/2025 | Rated A+. Whats the fine for violating section 53, 53a or 54:  No less than $500 and no more than $3,000, or by imprisonment of no more than 3 months, or both fine and imprisonment 3. Whats the fine for permitting an unlicensed person to operate machinery: -  No less than $1,000 and no more than $3,000, or imprisonment of no more than 3 months, or both fine and imprisonment 4. Whats the fine for v...

1- A hydrotest is being conducted on an underground line as a substitute for the external inspection. The test pressure is 200 psig. At the end of the test, the pressure must be at least: - C.190 psig 2- Determine the maximum allowed pressure for a class 300 flange that has a design temperature of 950 degrees F. The flange material is ASTM A217 gr.C12 - B. 375 psig 3- An 8 NPS pipe is being replaced with A106 gr. B material. The pipe retirement thickness is 0.218" and the corrosion allowa...

API 577 Which of the following statements is correct? - ANS API 577 provides guidance to the API authorized inspector on welding inspection. The actual throat of a weld is best described as: - ANS The shortest distance between the weld root and the face of a fillet weld. The term "arc blow" refers to which of the following? - ANS The deflection of the arc due to magnetic forces. An autogenous weld is a weld that is best described by which of the following? - ANS ...

1. What is the purpose of the swing gear on an excavator: answer- It connects the car body to the tracks 2. Who is responisble for inspecting a trench before anyone goes in it: answer- The equipment operator 3. What is the prefered sling angle: answer- 60* 4. The top of the spoil pile is called: answer- The crown 5. A four footbdeep trench requires an additional ladder for each _ of open trench: answer- 25ft 6. Materials mist be kept back from the edge of the trenxh a minimum of: answer...

1- A hydrotest is being conducted on an underground line as a substitute for the external inspection. The test pressure is 200 psig. At the end of the test, the pressure must be at least: -C.190 psig 2- Determine the maximum allowed pressure for a class 300 flange that has a design temperature of 950 degrees F. The flange material is ASTM A217 gr.C12 - B. 375 psig 3- An 8 NPS pipe is being replaced with A106 gr. B material. The pipe retirement thickness is 0.218" and the corrosion allowanc...

ASNT VT LEVEL II EXAMS QUESTIONS AND VERIFIED ANSWERS GRADED A++ B. every 3 years by retraining and retesting 1. Per ASNT Section XI, NDE personnel shall be recertified:A. every 5 years by re-examination B. every 3 years by retraining and retesting C. every 3 years based on continuing satisfactory performance D. annually by retraining B. his certification is automatically terminated 2. Per SNT-TC-1A, when an employee leaves his employer:A. his certification automatically transfers to hi...