Class a extinguisher Study guides, Class notes & Summaries

TFM02 Extinguisher Inspection Exam Test 2023/2024 Questions and Answers (Graded A)TFM02 Extinguisher Inspection Exam Test 2023/2024 Questions and Answers (Graded A)TFM02 Extinguisher Inspection Exam Test 2023/2024 Questions and Answers (Graded A)TFM02 Extinguisher Inspection Exam Test 2023/2024 Questions and Answers (Graded A) Clean Agent - ANSWER-Electrically non-conducting, volatile, or gaseous fire extinguishant that does not leave a residue upon evaporation. High-Pressure Cylinder - ANSW...

Seeding of BOD samples is necessary when samples - (All of the above) have a chlorine residual, have a previously been chlorinated, have been subjected to high temperatures, contain high or low pH industrial wastes When is blue-green algae the most dominant on a pond treatment system? - Summer A 30-inch diameter wastewater interceptor is observed to be flowing half-full at about two fps. The approximate volume of wastewater flowing through the pipe is 3.14x1.25 x 1.25 x 2 = 4.9 cfs x 449 =...

Fire Inspector 1 Study Questions with Complete Solutions What is the minimum acceptable residual pressure in a water supply system that must be available for firefighting? 20 psi What type of sprinkler system is a type of dry system that, when activated, flows water from all heads at the same time because all of the heads are open? deluge What is the starting point used to measure travel distance to an exit? the most remote point subject to occupancy How many sleeping accommodations are requ...

T/F A three dimensional fire often involves static flammable liquid. - ans False. 3D fires involve flammable liquid in motion as well as both horizontal and vertical surfaces. Class A fire extinguisher are ok for ___________, ____________, ______________, and _______________. They offer the coating effects of dry chemicals. - ans wood, paper, some plastics, and textiles When should dry chemical stored pressure fire extinguishers be removed and replaced? - ans at their next 6 year ...

S-12 S-13 Standpipe and Sprinkler Practice Questions with Certified Solutions "Fail Safe" when referred to in locks, means that the door can be opened if the power fails Where does the on-duty Building Evacuation Supervisor report when an alarm is activated? To the Fire Command Station ( To act as Fire Safety Director when the FSD or a Deputy FSD is not required to be on duty). "RCNY" is the abbreviation for Rules of the City of New York A fire alarm box is painted plain red (no stripe). ...

CDL PASSENGER ENDORSEMENT QUESTIONS AND ANSWERS 100% PASS You are driving a 40 foot bus at 30 mph. The road is dry and visibility is good. You should keep a safety space in front of your bus thatis at least ___ seconds. 4 A hazard is defined as: any condition which may cause your trip to be unsafe A standee line on a bus: is the line that all riders must stay behind while the bus is moving Your bus is disabled. The bus, with riders aboard, may be towed or pushed to a safe spot to discharge t...

50 ft Travel distance: Class B fire hazard 30 ft Travel distance: Class B 3D and pressure fire hazard 100 ft Travel distance: 125 Wheeled unit for 3D fire hazard Up to 3 2.5gal Class B high hazard: # of AFFF or FFFP extinguishers required 2 1.6gal Class B ordinary hazard: # of AFFF or FFFP extinguishers 10ft₂ Portable FE shall not be used on flammable liquid hazard where surface area exceeds 75ft Travel distance: Class D hazard 30ft Trav...

The fire marshal shall send notice to each examinee of the results of the examination no later than 30 days If the examination is conducted by a testing service the state marshal shall send notice of the results no later than 14 days If examination results will be delayed the state marshal shall send notice to the examinee no later than 90 days A renewal of a registration certificate or license is valid for a period of 2 years An apprentice permit expires After 1...

DHL Interview ATPL Questions with 100% Correct Answers What is the VOR change over distance? - answer60NM What is the minimum distance between parallel runways? - answer915m what the key points of using Mode 2 for parallel runways? - answerOnly straight in approaches allowed interception angle of no more that 30 degrees must be straight and level 1NM for localiser must be straight and level 2NM for Glideslope Minimum separation of 3NM on same Loc Min separation of 2 NM on adjacent Loc ...

TEST BANK RN ATI LEVEL 1 B – CONCEPT-BASED ASSESSMENT, PROCTORED EXAM FOR LEVEL 1 B | 1 – 100 TESTBANK. (ANSWERED) QUESTION AND ANSWERS 100 QUESTIONS WITH 100% CORRECT ANSWERS A nurse is submitting a dietary request for a client who devoutly follows Mormon dietary practices. The nurse should ask the client if they would like which of the following foods or beverages excluded from meals? A. Bacon B. Coffee C. Shrimp D. Milk - B. Coffee A nurse is assessing a client who has a rash ...