Condensate drain - Study guides, Class notes & Summaries

the process by which all forms of microbial life, including spores, are destroyed is the definition of a. sanitization b. disinfection c. decontamination d. sterilization - d. sterilization In a non table top sterilizer, a gauge on the main steam line, usually located at the back of the sterilizer, tells you the steam pressure a. inside the jacket b. inside the chamber c. as steam is entering the jacket d. as steam is exitiing the chamber - a. inside the jacket which ...

______ draft is produced by a fan located between the boiler and the chimney - Answer induced _______ gauge glasses are used on boilers with precious exceeding 250 psi - Answer flat _______ is caused by allowing sudden extreme changes of temperature in a furnace - Answer spalling ________ boilers can operate at higher pressures than fire tube boilers - Answer water tube _________ are necessary for complete combustion - Answer time, temperature, mixture, and atomization _________ is alw...

One of the legal responsibilities of the engineer during an inspection is: Select one: a. To notify the Workers Compensation Board of the inspection b. Point out any known or suspected defects to the inspector c. To have at least two staff members present at all times d. To be in possession of an inspection certificate - Answer-b The _____ tubes of a fired hot oil heater have fins on their outer surfaces. Select one: a. Water b. Radiant c. Extended type d. Fire - Answer-c The injecti...

What does IICRC stand for? Institute of Inspection Cleaning and Restoration Certification What are the 5 principles of Mold Remediation? 1. Safety and Health Workers and Occupants 2. Document the Conditions and Work Processes 3. Control the Contaminate at is Source 4. Physically Remove the Contamination(Source Removal) 5. Correct the Moisture Problem to Prevent Recontamination What does SBS stand for? Sick Building Syndrome What does VOC stand for? Volatile Organic Compoun...

A condensate line should ______________. a. empty directly into the waste drain line b. end 1 inch above the waste drain line c. not drain into the waste drain line d. extend at least 1 inch into the waste drain line - Answer b. end 1 inch above the waste drain line A condensing furnace _____________. a. works like an air conditioner, except that it heats instead of cools b. is a furnace covered in condensation c. is more efficient than conventional furnaces and uses a secondary heat exc...

NATE Air Conditioning and Heat Pump Exam Questions and Answers Updated 2024/2025 (GRADED) The combined output of a heatpump and its auxiliary heat should not exceed the calculated heat loss of a home by more than ____%. - ANSWER-15% What amount of auxiliary electronic heat is needed when the output of a heat pump on a design day equals 18,800 Btuh and the heat loss of a home is 29,700 Btuh? - ANSWER-3.2 kWh The three processes that transfer heat energy are conduction, convection, and _____...

Texas Mold Assessment Consultant (MAC) State Exam 2023 What does IICRC stand for? Institute of Inspection Cleaning and Restoration Certification What are the 5 principles of Mold Remediation? 1. Safety and Health Workers and Occupants 2. Document the Conditions and Work Processes 3. Control the Contaminate at is Source 4. Physically Remove the Contamination(Source Removal) 5. Correct the Moisture Problem to Prevent Recontamination What does SBS stand for? Sick Building S...

What does IICRC stand for? - correct answer Institute of Inspection Cleaning and Restoration Certification What are the 5 principles of Mold Remediation? - correct answer 1. Safety and Health Workers and Occupants 2. Document the Conditions and Work Processes 3. Control the Contaminate at is Source 4. Physically Remove the Contamination(Source Removal) 5. Correct the Moisture Problem to Prevent Recontamination What does SBS stand for? - correct answer Sick Building Syndrome What do...

3rd Class Stationary Steam Engineer License Prep ________ are necessary for complete combustion - time, temperature, mixture, and atomization if the steam pressure gauge indicates 200 PSIG, the absolute pressure is______ - 214.7 a boiler is operating at 400 PSI, and the safety valve opens at 410 PSI and closes at 398 PSI. The blowdown is______psi - 12 an oil cooler is commonly used with a(n) ________ when operating in conjunction with a turbo- generator - steam turbine a boi...

_________ are necessary for complete combustion - correct answer time, temperature, mixture, and atomization if the steam pressure gauge indicates 200 PSIG, the absolute pressure is______ - correct answer 214.7 a boiler is operating at 400 PSI, and the safety valve opens at 410 PSI and closes at 398 PSI. The blowdown is______psi - correct answer 12 an oil cooler is commonly used with a(n) ________ when operating in conjunction with a turbo-generator - correct answer steam turbine a b...