Elevator mechanic Study guides, Class notes & Summaries

A contractor wants to raise the car speed from 100fpm to 125fpm, it currently has a 12" sheave. What sheave is required? - CORRECT ANS Diam=12" 12/4=3" 25fpm=3" 100fpm + 25fpm= 12"+3"= 15" sheave A MOV (Metal Oxide Varistor) burns out. You replace it, but cannot read voltage or resistance. What should you do? - CORRECT ANS Replace it with a larger MOV On a Ward-Leonard circuit the break is set, but the motor is trying to slip through the break. What is the issue? - CORRECT ANS Suici...

Elevator Mechanic Exam Review Elevator Mechanic Study Questions with COMPLETE SOLUTIONS (LATEST) If rigging gear is roped 3:1 and a BEAM CLAMP is used to lift a 6,000lb load. What is the beam capacity? - CORRECT ANSWER 18,000lbs. Beam capacity is cut in half with use of clamp, when rigging all blocks, rope, and clamps will be Equal to the lowest load rating What are the consequences of misaligned joints on a Rack and Pinion? - CORRECT ANSWER Broken Gear teeth. CWT derailment. Excess...

Elevator Mechanic Exam Review Elevator Mechanic Study Questions with COMPLETE SOLUTIONS (LATEST) If rigging gear is roped 3:1 and a BEAM CLAMP is used to lift a 6,000lb load. What is the beam capacity? - CORRECT ANSWER 18,000lbs. Beam capacity is cut in half with use of clamp, when rigging all blocks, rope, and clamps will be Equal to the lowest load rating What are the consequences of misaligned joints on a Rack and Pinion? - CORRECT ANSWER Broken Gear teeth. CWT derailment. Excess...

ASME Correct Answer: American Society of Mechanical Engineers DOSH Correct Answer: Division of Occupational Safety and Health LADBS Correct Answer: Los Angeles Department of Building and Safety Alteration made to conveyance shall comply with ASME A17.1-204 Section Correct Answer: 8.7 The seismic section of ASME A17.1-2004 and alterations made to conveyances must also comply with this section Correct Answer: 8.4 What must be submitted to the applicable Division Elevator office...

NEIEP 200 Final Exam Version 2 (Latest 2023/ 2024 Update) Questions and Verified Answers| 100% Correct| Grade A Q: a mechanic attaches a chainfall to a hoisting beam with a beam clamp. what happens to the capacity of the hoisting beam? Answer: it is reduced to 50% of original capacity Q: you are rigging elevator equipment with a sling angle of 60 degrees. you are using a shouldered eye bolt with a tapped 1/2" diameter hole. once the shoulder is seated, what is the minimum threa...

Elevator Mechanic Exam Review Elevator Mechanic Study Questions with COMPLETE SOLUTIONS (LATEST)

Elevator Mechanic Exam Review Exam | Questions and Answers Graded A+ Latest 2024/2025 Know the formula for RPM - CORRECT ANSWER RPM = 60 ∙ ƒ ÷ P÷2 = Step 1. 60 x Frequency (Hz.) = Step 2. Poles ÷ 2 = Take answer 1 and ÷ by answer 2 = You are using a Temp Run Box and you get shocked! Why! 520 Pg. 4 - CORRECT ANSWER Bad Ground Scaffolding, You have 32' of rise, you are using 3x5 scaffolding. Where will the tie off points be