Millwright latest test - Study guides, Class notes & Summaries

Millwright Exam Prep|Latest Update Graded A+ 1. When the downward force at C2 is 100 lb and D2 = 2.5 inches, the upward force at C1 will be ________lb if D1 = 4 inches. A. 160 B. 256 C. 384 D. 240 A. 160 x/12.56 sq in = 100 lbs/7.85 sq in x = (100lbs/7.85 sq in)12.56 x = 160 lbs 2. Add the following decimals and express the answer to three decimal places. 0.4789 + 3.125 + 9.656 A. 13.26 B. 13.3 C. 13.259 D. 13.2599 C. 13.259 3. What are common materials used as ele...

Millwright Level 1 Exam Questions and Answers Latest | Graded A+. On a pedestal grinder, the gap between the grinding wheel and work rest should not exceed: - ANSWER 1/8 inch The kind of abrasive material used in grinding wheels for general purpose applications is: - ANSWER aluminum oxide A blotter is used on a grinding wheel to: - ANSWER protect the flanges from the abrasize grit, display information about the wheel and compensate for the uneven surfaces on the wheel Flanges should at l...

NCCER MILLWRIGHT PRACTICE EXAM 2 LATEST 2023 WITH COMPLETE SOLUTION unusual If the seal was not properly aligned or there is excessive wear in some bearing or shaft,_______ wear tracks will be the indicator sharpened brass putty knife For removing hard to remove gasket materials found on sealing surfaces, ______ is recommended Conducted on the job Apprenticeship training is_______ distance Charting alignment on a graph requires a chart that is divided into thousandths of an inch vertic...

AIC Test questions and answers latest top score. Which principle of law states that if the prime contractor reasonably relies on the promise or price of the subcontractor to its detriment, then the subcontractor must be held to its promise to avoid harm to the prime contractor even though a signed contract between the contractor and subcontractor does not exist at the bidding phase of a project? - correct answers.Promissory Estoppel What does R.S. Mean's unit of meas...

NCCER MILLWRIGHT PRACTICE EXAM 2 LATEST 2023 WITH COMPLETE SOLUTION unusual If the seal was not properly aligned or there is excessive wear in some bearing or shaft,_______ wear tracks will be the indicator sharpened brass putty knife For removing hard to remove gasket materials found on sealing surfaces, ______ is recommended Conducted on the job Apprenticeship training is_______ distance Charting alignment on a graph requires a chart that is divided into thousandths of an inch vertic...

NCCER MILLWRIGHT PRACTICE EXAM 2 LATEST 2023 WITH COMPLETE SOLUTION unusual If the seal was not properly aligned or there is excessive wear in some bearing or shaft,_______ wear tracks will be the indicator sharpened brass putty knife For removing hard to remove gasket materials found on sealing surfaces, ______ is recommended Conducted on the job Apprenticeship training is_______ distance Charting alignment on a graph requires a chart that is divided into thousandths of an inch vertic...

MILLWRIGHT LEVEL 1 FINAL EXAM LATEST QUESTIONS AND 100 % VERIFIED ANSWERS ( +A GRADE) OVER 100 QUESTIONS 1.On a pedestal grinder, the gap between the grinding wheel and work rest should not exceed: Correct answer :1/8 inch 2.The kind of abrasive material used in grinding wheels for general purpose applications is: Correct answer: aluminum oxide 3.A blotter is used on a grinding wheel to: Correct answer; protect the flanges from the abrasize grit, display information about the wheel and...

Millwright Exam Prep Latest Version Already Graded A 1. When the downward force at C2 is 100 lb and D2 = 2.5 inches, the upward force at C1 will be ________lb if D1 = 4 inches. A. 160 B. 256 C. 384 D. 240 A. 160 x/12.56 sq in = 100 lbs/7.85 sq in x = (100lbs/7.85 sq in)12.56 x = 160 lbs 2. Add the following decimals and express the answer to three decimal places. 0.4789 + 3.125 + 9.656 A. 13.26 B. 13.3 C. 13.259 D. 13.2599 C. 13.259 3. What are common materials used as electrical cond...

1 PRACTICE TEST AIC STUDY GUIDE EXAM | QUESTIONS & ANSWERS (VERIFIED) | LATEST UPDATE | GRADED A+ Which of the following documents is utilized for correspondence between the A/E or Owner and the Contractor? A. Job Diary B. Memorandum C. Construction Report D. Formal Business Letter Correct Answer: d Which of the following documents is used for correspondence between the home office and the job site? A. Job Diary B. Memorandum C. Construction Report D. Formal Business Lette...

1 AIC EXAM #2 | QUESTIONS & ANSWERS (VERIFIED) | LATEST UPDATE | GRADED A+ What is the name of the law principle for referring the Contractor to other documents that are not contained in the package provided? Correct Answer: Incorporated by Reference. Which document issued by the Architect illustrates what is to be built? Correct Answer: Plans Which document describes quality of work and the quality of the materials and the construction execution procedures? Correct Answer: Techn...