Nicet level 1 exam 2024 - Study guides, Class notes & Summaries

NICET Level 1 inspection and Testing Exam 2024 When using a pulse load tester on a sealed lead acid battery, the minimum acceptable capacity is... -Answer-80% When a software change is made to a fire alarm system, what percentage of the initiating devices not affected by the change must be tested -Answer-10% When testing elevator recall, the elevator should go to the alternate level when: -Answer-The lobby smoke detector on the recall level is activated Minimum requirement for system docu...

4 wires Answer - what is the maximum number of 14 AWG RHH conductors which can be installed in 1/2 rigid metal conduit? 3.5'-48" to the actuator Answer - Which of the following would be an appropriate mounting height for a pull station? 1 flash per second Answer - What is the minimum flash rate for a visible notification device? 90" to the top of the device Answer - What is the minimum mounting height for audible notification devices? Such that the entire lens is not less then 80...

The operable part of a manually actuated alarm initiating device shall be not less than ____ inches AFF?Answer - 42 Consider the use of grounding electrodes. Rod and pipe electrodes shall not be less than____ feet in length?Answer - 8 Smoke detectors should not be located in a direct airflow or closer than ____ inches from an air supply diffuser or return air opening?Answer - 36 Consider the use of visible notification appliances. Wall mounted appliances shall be mounted such that th...

NICET LEVEL 1 exam 2024 with verified answers

4 wires - Ans what is the maximum number of 14 AWG RHH conductors which can be installed in 1/2 rigid metal conduit? 3.5'-48" to the actuator - Ans Which of the following would be an appropriate mounting height for a pull station? 1 flash per second - Ans What is the minimum flash rate for a visible notification device? 90" to the top of the device - Ans What is the minimum mounting height for audible notification devices? Such that the entire lens is not less then 80" - Ans What is t...

When using a pulse load tester on a sealed lead acid battery, the minimum acceptable capacity is... Answer - 80% When a software change is made to a fire alarm system, what percentage of the initiating devices not affected by the change must be tested Answer - 10% When testing elevator recall, the elevator should go to the alternate level when: Answer - The lobby smoke detector on the recall level is activated Minimum requirement for system documentation Answer - Battery calculations/fl...

NICET Level 2 NFPA 25: Standard for Inspection, Testing, and Maintenance of Water-Based Fire Protection Systems Exam 2024 Chapter 1 - Answer-Administration Chapter 2 - Answer-Referenced Publications (Other NFPA Standards) Chapter 3 - Answer-Definitions Chapter 4 - Answer-General Requirements (Owner's Chapter) Chapter 5 - Answer-Sprinkler Systems (Heads, Hangers, Waterflow Alarm Devices, AF Systems, Dry Pipe Systems) Chapter 6 - Answer-Standpipe & Hose Systems Chapter 7 - Answer-Hydra...

Nicet Level 2: Concrete Exam Questions and Answers 2024 What is the testing frequency for concrete? - Answer-every 50 yards When should you take cylinder samples? - Answer-Every 100 yards What are the components on a batch ticket? - Answer-1. Ticket Number 2. Plant 3. Project Number 4. Mix ID 5. Time of Batch 6. Time arrival 7. Time Discharge 8. Time Completed 9. Mix proportions When should concrete samples should not be taken? - Answer-Before 10% and 90% of truck has been discharge...

NICET LEVEL 1 EXAM 2024 COMPLETE 400 QUESTIONS WITH 100% DETAILED VERIFIED AND CORRECT ANSWERS BRAND NEW EXAM ALREADY GRADED A+

NICET LEVEL 1 ACTUAL EXAM LATEST 2024 QUESTIONS AND CORRECT ANSWERS|GRADED A+