Operations mws - Study guides, Class notes & Summaries

Mobile Water Supply| Equipment and Apparatus Test| Review 2025| Complete 100% During an MWS apparatus inspection, the lowest acceptable fuel gauge reading is: A. full B. at least 2/3 full C. at least 1/2 full D. at least 3/4 full D. at least 3/4 full What type of valve is commonly used on mobile water supply apparatus for rapid water discharge? A. Gate valve B. Dump valve C. Ball valve D. Butterfly valve Which of the following apparatus is primarily used to transport large ...

A Balancing Authority notices that Operating Reserve has steadily declined throughout the hour. What is the most likely cause? a) Loss of a large generator in the area b) An inaccurate load forecast c) Loss of a major transmission line d) A malfunction of EMS b) An inaccurate load forecast Balancing Area A notices that the Interconnection frequency is 59.94 Hz and their ACE is 0. Which of the following could be the cause of this reading? a) A net under-generation in Balancing Area...

Water Shuttle Operations Questions with complete solution 2024You've been asked to help prepare a pre-incident plan for water shuttle operations that may be needed at a small factory in your jurisdiction. The best choice for the route of travel between the fill site and the dump site is: - correct answer A five-mile, circular route where the leg from the fill site would be downhill and the leg from the dump site would be uphill. You've been asked to help with pre-incident planning of water...

The Reliability Coordinator just informed you of a slow time error correction which will begin at the top of the next hour. Your EMS system will not let you change your scheduled frequency. Your Frequency Bias Setting is -100 MW/.1Hz. What action should you take? A) Increase Net Interchange Schedule by 20 MWs. B) Inform the Reliability Coordinator that you cannot participate in the time error correction. C) Decrease Net Interchange Schedule by 20 MWs. D) Increase Net Interchange Sche...

MWS EOC Questions with complete solution 2024 NFPA 1901 - correct answer Standard for Automotive Fire Apparatus MWS must carry how much water - correct answer 1000 gallons but most carry Apparatuses carrying less than 2500 gal are best for - correct answer Shuttle operations Apparatuses carrying more then 2500 gal are best for - correct answer Stationary water supply NFPA 1901 requirements - correct answer One external fill connection Filled at a minimum of 1000 GPM Equipt wi...

The Reliability Coordinator just informed you of a slow time error correction which will begin at the top of the next hour. Your EMS system will not let you change your scheduled frequency. Your Frequency Bias Setting is -100 MW/.1Hz. What action should you take? A) Increase Net Interchange Schedule by 20 MWs. B) Inform the Reliability Coordinator that you cannot participate in the time error correction. C) Decrease Net Interchange Schedule by 20 MWs. D) Increase Net Interchange Sche...

SOS NERC Prep - Reliability Exam (Fall 2023) A step-down transformer has a 2 to 1 turn ratio. If the power flowing into the high side of the transformer is 140 MWs, what is the power flowing out? A) 150 MWs B) 140 MWs C) 280 MWs D) 70 MWs Voltage of a 345 kV transmission line is at 90% of normal. If you energize a capacitor rated at 100 MVar, what will be the actual MVars gained? A) 50 MVars B) 81 MVars C) 90 MVars D) 30 MVars If generators are supplying reactive power to the system, the genera...

SOS NERC RELIABILITY EXAM QUESTIONS & ANSWERS LATEST GRADED A+. The Reliability Coordinator just informed you of a slow time error correction which will begin at the top of the next hour. Your EMS system will not let you change your scheduled frequency. Your Frequency Bias Setting is -100 MW/.1Hz. What action should you take? A) Increase Net Interchange Schedule by 20 MWs. B) Inform the Reliability Coordinator that you cannot participate in the time error correction. C) Decrease Net Inte...

Chapter 16 Water Supply| PreAssessment [Comprehensive] Q&A 2025| Best Reviewed A dry hydrant provides access to a static water source Identify the primary factors that determine the flow rate during a fire pump operation. The diameter of the hose and the water pressure. The length of the hose and the type of nozzle. The type of water source being used. The type of fire pump being operated. --- Describe the function of a relay pumping operation in rural firefighting. It ensures...

What is the fuel dump rate - 800lbs per minute What does AVCS stand for - Active vibration control system How much of the rescue hoist cable is painted bright orange - First and last 20ft What is the minimum pressure to jettison all buoys - 1100psi When does the rescue hoist slow down to 50fpm - 10ft from full up 5ft from full down How many feet of cable does the AQS-22 have - 2550ft Fire extinguishers have a continuous discharge of how long - 25-30 seconds Nomenclature of the radar - AP...