Plumbing design - Study guides, Class notes & Summaries

The modern word for plumber is derived from the Latin word for - ANSWER-A person who works with lead LEED applies to all areas of the profession, except - ANSWER-Renovation Water that comes from laundry and bathtubs and reused in known as - ANSWER-Graywater Suggested national plumbing standards are called - ANSWER-Model codes You are offered a job by another contractor before you have fulfilled your current obligations. The professional response is to - ANSWER-Ask the contractor to w...

Why does the HVAC system need to be balanced at the end of a commercial project? A. To verify that air quality levels are within the design specifications B. To detect significant air leaks in the ductwork. C. To adjust airflow at each device location to meet the criteria in the engineer's design D. To determine that each office is receiving the amount of outside air required by the design -Answer- The correct answer is C. Balancing the HVAC system is the process of measuring air f...

NCIDQ IDPX Prep Exam Why does the HVAC system need to be balanced at the end of a commercial project? A. To verify that air quality levels are within the design specifications B. To detect significant air leaks in ductwork C. To adjust air flow at each device location to meet the criteria in the engineer's design D. To determine that each office is receiving the amount of outside air required by the design - The correct answer is C. Balancing the HVAC system is the process of meas...

Why does the HVAC system need to be balanced at the end of a commercial project? A. To verify that air quality levels are within the design specifications B. To detect significant air leaks in ductwork C. To adjust air flow at each device location to meet the criteria in the engineer's design D. To determine that each office is receiving the amount of outside air required by the design - correct answer The correct answer is C. Balancing the HVAC system is the process of mea...

NCCER PLUMBING LEVEL 1 2024 NEWEST 200 QUESTIONS AND DETAILED CORRECT HIGHLIGHTED ANSWERS ALREADY GRADED A+. Your supervisor points out that you forgot to complete a step in the assembly of a drain in a DWV system. One of the apprentices that you are supervising was a he person installing the drain. The responsible action is to - ANSWER- Take responsibility for the work done under your supervision People who develop, design, manufacture, and test mechanical devices are called - ANSWER- Mech...

Of the four board subjects given for Master Plumbers examination, which of this subject was originally split into two subjects? A. Plumbing Code B. Design and Installations C. Plumbing Arithmetic D. Practical Problems - Answer D Copper tube and fittings used for drainage and vent piping installed aboveground shall be at least ____. A. Type DWV B. Type L C. Type K D. Type M - Answer A A domestic dishwasher drain shall first connect to ____. A. an approved airgap fittin...

ARE CE Tests with Complete Solutions | Latest Updated Graded A+ Parts of a weld - Leg Throat Face If hazardous waste discovered during construction who pays? IE underground storage tank - Contractor pays and Owner reimburses -A201 states owner is responsible for remediation of hazardous materials at project site who has discretion to decided whether or not construction meets design intent? - architect Costs to repair or correct work due to a design defect are payable by - the architect's...

NYC high pressure boiler license Exam Questions and Correct Answers 100% The minimum blowdown for a spring loaded safety valve shall be of what percent of set pressure? - CORRECT ANSWER-10% How is the main steam pressure gages tested? - CORRECT ANSWER-With an inspectors gage Who is in charge of the code for any plumbing installations? - CORRECT ANSWER-The nyc plumbing code When will anchorage or guides be inspected? - CORRECT ANSWER-Annually How many brass washout plugs does a minia...

High Pressure Steam Exam Nyc Boiler License Exam With Verified Answers 1 The maximum blow down for a safety valve on a forced flow steam generator or high temperature water boiler shall be of what percent of the set pressure? - CORRECT ANSWER-10%. HP Code: 14-9.12 3 Who oversees the code for any plumbing installations? - CORRECT ANSWER-The NYC Plumbing Code NYC Mech: 1002.1 4 When will anchorage or guides be inspected? - CORRECT ANSWER-Annually. NYC Mech: 1210.3.1.2 5 How many bras...

Why does the HVAC system need to be balanced at the end of a commercial project? A. To verify that air quality levels are within the design specifications B. To detect significant air leaks in ductwork C. To adjust air flow at each device location to meet the criteria in the engineer's design D. To determine that each office is receiving the amount of outside air required by the design - Answer- The correct answer is C. Balancing the HVAC system is the process of measuring ai...