Pumper test 3 - Study guides, Class notes & Summaries

Pumper Test 3

D-O Pumper CDC CCRE QUESTIONS AND ANSWERS GRADED A+ The lowest acceptable fuel gauge reading on a fire apparatus during inspection is: at least 3/4-full. The rescue tool supply system equivalent of a junction box is called: a manifold 3 conditions where you should drive your fire apparatus in low gear: 1. Approaching an intersection 2. Travelling around a corner 3. Climbing a hill Three conditions to wearing your seat belt before an emergency vehicle moves: 1. Providi...

Pumper-- Question and answers already passed 2023/2024Testing a flow meter consist of: - correct answer Connecting a hose line equipped with a solid stream nozzle to each discharge being tested. When conducting a service test using a static water source, you must have____ ft of hard intake hose for drafting? - correct answer 20 What are 3 things that must have occurred prior to raising the cab? - correct answer •All cab doors have been securely closed. •All loose items in the cab hav...

Pumper Operator Test Questions and Answers 100% Solved 3 components of total pressure loss ️️FL elevation pressure appliance pressure loss how should you8 conduct the inspection porcess? ️️be systematic what are saddle tanks ️️primary and back up tnaks can switch between the two in the cab how can you check the level of water and foam tanks and how full should they be? ️️check gauge, level indicator lights, or sight glass for proper levels both should always be kept ...

Fire protection engineers have established _____ PSI as a minimum required residual pressure when computing the available water for flow test results. - 20psi The most common gallonage rating for horizontal shaft pumps in use today are _____ - _____ GPM. - 500 - 1500 gpm A fire pump serving a standpipe system should be tested ______ - weekly A fire department pumper can effectively supply around ______ feet in a high rise building depending on hydrant pressure and other factors. - 450 feet...

Pumper CDC Questions and Answers Fully Solved A fire apparatus should be started with all electrical switches in the OFF position in order to: Start the engine without a load. During an inspection of your fire apparatus, you should ensure that the foam level is: Full Match the location of each fire apparatus inspection item to the name that applies saddle tanks - 6 winch - 7 main hose bed - 2 automatic snow chains - 4 intake strainers - 5 ladders - 3 compartments - 1 ...

Alabama Fire College Inspector 1/2 Already Graded A Fire protection engineers have established _____ PSI as a minimum required residual pressure when computing the available water for flow test results. 20psi The most common gallonage rating for horizontal shaft pumps in use today are _____ - _____ GPM. 500 - 1500 gpm A fire pump serving a standpipe system should be tested ______ weekly A fire department pumper can effectively supply around ______ feet in a high rise building depending on hy...

Driver Operator Pumper Correctly Answered Test 2024. Water - correct answer - most commonly used extinguishing agent - noncombustible - absorbs large amounts of heat Waters Boiling Point - correct answer 212° F Waters freezing point - correct answer 32°F Waters Expansion Rate - correct answer 1,700 to 1 at 500° F Law of Specific Heat - correct answer Measures the ability of any substance to absorb heat Measured in BTUs (British Thermal Units) 1 BTU = the amount of heat r...