1 or more safety valves - Study guides, Class notes & Summaries

MN Boiler License Exam Questions and Answers, Latest Updated 2024/2025 (GRADED) what are the conditions necessary for good combustion? a) low sulfur content b) Thermal, thermocoupler, tubular c) turbulence, temperature, time 3T's - answerc) turbulence, temperature, time 3T's why is secondary air necessary in hand fired boilers? a) Necessary to burn the combustible gases b) if primary air should fail c) used only if sulfur content is high - answera) Necessary to burn the combustible gase...

What are the 3 funtions of an Oil Burner nozzle? - Answer- Atomize, Meter, Patter. What are the 2 voltage circuits of a primary control? - Answer- Line & Low. What is the function of a fuse? - Answer- Protect circuit. What is the High Limit cut out? - Answer- Max safe Temp or Pressure setting. What is the High Limit cut in? - Answer- Cut out minus Differential. What is the "Max" Lockout time for a burner with a 3 GPH Flow Rate? - Answer- 45 Seconds. What is the minimum stack ...

The inspector is not required to determine ____ ___ of any system or component. - Answer- -Years of age -Life expectancy -Make model Horizontal waste pipe should slope ____ inch per foot - Answer- 1/4" per foot if < 3 inch pipe. 1/8" per foot if > or = to 3 inch pipe Drip screed - Answer- Also called weep screed. Used at the base/bottom of stucco walls to release moisture. Pressure Vacuum Breaker (PVB) - Answer- Used for Backflow Prevention. Lawn Irrigation systems: install...

1) A nurse is reviewing the techniques for transferring a client from a bed to a chair with a group of assistive personnel (AP). Which of the following instructions should the nurse include? ANS: Use lower-body strength RATIONALE: The nurse should instruct the AP to use lower-body strength when lifting a client to reduce stress on the back 2) A nurse is participating in a quality improvement study about the effectiveness of client pain management on the unit. Which of the following stra...

Professional Home Inspector Exam NHIE / TREC Questions and Answers Already Passed Document Content and Description Below Professional Home Inspector Exam NHIE / TREC Questions and Answers Already Passed The inspector is not required to determine ____ ___ of any system or component. -Years of age -Life expecta ncy -Make model Horizontal waste pipe should slope ____ inch per foot 1/4" per foot if < 3 inch pipe. 1/8" per foot if > or = to 3 inch pipe Drip screed Also called weep screed. U...

MN Boiler License Exam Questions and Answers, Latest Update 2024/2025. what are the conditions necessary for good combustion? a) low sulfur content b) Thermal, thermocoupler, tubular c) turbulence, temperature, time 3T's - answerc) turbulence, temperature, time 3T's why is secondary air necessary in hand fired boilers? a) Necessary to burn the combustible gases b) if primary air should fail c) used only if sulfur content is high - answera) Necessary to burn the combustible gases when p...

MN Boiler License Exam Questions and Answers, Latest Update 2024/2025 (GRADED) what are the conditions necessary for good combustion? a) low sulfur content b) Thermal, thermocoupler, tubular c) turbulence, temperature, time 3T's - answerc) turbulence, temperature, time 3T's why is secondary air necessary in hand fired boilers? a) Necessary to burn the combustible gases b) if primary air should fail c) used only if sulfur content is high - answera) Necessary to burn the combustible gases...

Z-51 Written Exam Questions and Complete Solutions In a steam turbine, what is the function of a Kingsbury thrust bearing? A) Maintain first stage steam pressure. B) Compensate for coupling misalignment. C) Adjust shaft torque at start up. D) Maintain axial positioning of the rotor shaft. - Answer: D) Maintain axial positioning of the rotor shaft. The ratio of actual pressure of water pressure in the atmosphere to the saturated pressure of given temperature is A) partial pressure....

NICET Level 2 Water-Based Systems (Latest Update) Qs & As| 100% Correct| Grade A (Verified Answers) Q: When testing a antifreeze solutions, what tools are recommended? Answer: Refractometer, or hyrdometer Q: The person who performs the LOTO on a piece of equipment to perform repairs or maintenance is the _______ Answer: authorized person Q: The minimum size of an impairment tag is _____ in. Answer: 4x6 Q: Safe oxygen levels in a confined space is betwe...

Medical Gas 6010 Installers Practice Test Questions and Answers 100% Pass _ % of the zones shall be tested at the outlet most remote from the source by the verifier to complete the piping particulate test? A) 25 B) 50 C) 75 D) 10 A) 25 _ connectors shall connect the vacuum pumps with their intake and outlet piping? A) anti- vibration B) dielectric C) flexible D) insulated C) flexible _ shall not be used to power the venture of a WAGD system? A) inert gas B) instrument air C) medical...