A circular mil - Study guides, Class notes & Summaries

branch circuit - ANSWER-That portion of a wiring system extending beyond the final overcurrent device is called the: Calculated load - ANSWER-The final sum of the computed loads, based on the minimum code requirements, is the Resistance - ANSWER-As compared to #10, a #8 wire of the same Iength has less: 0.001 inch - ANSWER-One circular mil is the area of a circle whose diameter is: 1,000,000 CM - ANSWER-6. A round bus-bar one inch in diameter, has a circular mil area of: four time...

branch circuit - Answer- That portion of a wiring system extending beyond the final overcurrent device is called the: Calculated load - Answer- The final sum of the computed loads, based on the minimum code requirements, is the Resistance - Answer- As compared to #10, a #8 wire of the same Iength has less: 0.001 inch - Answer- One circular mil is the area of a circle whose diameter is: 1,000,000 CM - Answer- 6. A round bus-bar one inch in diameter, has a circular mil area of: four...

NCCER Test Questions and Answers (100% Pass) Latest 2024/2025. A UL listed rod type ground electrode must have minimum length of 8'' in a circuit of pure capacitance, the current leads the voltage by 90 degrees The standard unit for measuring the cross sectional area of wire is the circular mil the drawing scale is most likely to be found in the drawing title block what is the minimum number of overload sensing units required for all three phase motors 3 what is the resultant distance bet...

NCCER Test Questions and Answers 100% Pass. A UL listed rod type ground electrode must have minimum length of 8'' in a circuit of pure capacitance, the current leads the voltage by 90 degrees The standard unit for measuring the cross sectional area of wire is the circular mil the drawing scale is most likely to be found in the drawing title block what is the minimum number of overload sensing units required for all three phase motors 3

Rodeo Test Exam Questions With 100% Correct Answers When digging by hand you should outline the hole around the stake. The diameter of the hole should be at least ____ greater than the diameter of the butt of the pole. - answerD) 6 inches ____ polarity is standard for all single-phase distribution transformers 200 KVA and below having high-voltage ratings of 9,000 votls and below. - answerA) Additive What does the acronym ANSI stand for? - answerAmerican national standards institute When ...

Electrician NCCER Questions With Correct Answers 2024 Which article of the NEC covers grounding? - ANS-Article 250 What is a dropout plate? - ANS-Metal plate with a curve surface for cable to follow as it passes from the tray All of the following are common service voltages in the United States Except: - ANS-372/575 3 Phase, 4-wire What does a GFCI breaker do? - ANS-Opens a circuit to prevent operation of an electrical device What will happen when one or more coils in a winding are ...

branch circuit - ANSWER-That portion of a wiring system extending beyond the final overcurrent device is called the: Calculated load - ANSWER-The final sum of the computed loads, based on the minimum code requirements, is the Resistance - ANSWER-As compared to #10, a #8 wire of the same Iength has less: 0.001 inch - ANSWER-One circular mil is the area of a circle whose diameter is: 1,000,000 cm - ANSWER-A round bus-bar one inch in diameter, has a circular mil area of: four times a...

Journeyman Electrician #5 | Questions and Correct Answers | Latest Update 2024/2025 | Graded A+ Unless listed and identified otherwise, terminations and conductors of sizes 14 AWG through 1 AWG shall be rated at _____. a) 75°C b) 75°F c) 90°C d) 60°C - Answer -D: 60°C Ref: 110.14(C)(1)(a)(1) The MINIMUM size copper equipment bonding jumper on the supply side of a service consisting of parallel copper phase conductors with a total circular mil area of 2000 kcmil shall be ____.a)...

NCCER Examination Prep Set Questions Revised With Correct Answers < Updated & Already Passed > A UL listed rod type grounding electrode must have a MINIMUM length of? - ANSWER : 8' What is the MINIMUM number of overload sensing units required for all three phase motors? - ANSWER : 3 In a circuit of pure capacitance, the current leads the voltage by an angle of? - ANSWER : 90 degrees The standard unit for measuring the cross sectional area of wire is the? - ANSWER ...

Electrical NCCER test Questions And Answers All Correct In a guardrail system, the guardrails can be made of any of the following EXCEPT: - ANS rope banding If the potential across the circuit is 48 volts and the current is 5 amps the resistance of the circuit is: - ANS 9.6 ohms A UL listed rod type grounding electrode must have a minimum length of: - ANS 8' What is the MINIMUM number of overload sensing units required for all three phase motors? - ANS 3 In a circuit of pu...