Asme test - Study guides, Class notes & Summaries

API 570 Study Guide (Full) Questions and Answers Rated A+ Pressure applied inside a pipe creates stress in the pipe wall. These stresses are highest on which weld orientation? longitudinal weld Per B31.3, how much RT is conducted on circumferential welds of a pipe in normal service? 10% for welded pipe, the normal thickness of under-tolerance is? .010 or 10 mils The corrosiveness of soils can be determined by measuring the soils: Resistivity when qualifying a weld procedure t...

NCCCO TWR Practice Test Study Guide Exam with 100% Verified Answers 1. Which of the following OSHA regulations govern suspended personnel platforms? - CORRECT ANSWER-OSHA 1926.550(g) 2. According to ASME B30.3, the prohibited zone for power lines that are 60kV is? - CORRECT ANSWER-15ft 3. According to ASME B30.3, load hoist rotation resistant wire rope has a design factor of? - CORRECT ANSWER-5 to 1 4. According to ASME B30.3, when lifting a suspended personnel platform the design fa...

Splices in rall tracks shall have - ANSWER Smooth Joints Hydraulic systems should have their proper fluid level checked - ANSWER Daily If power fails during operations, the following shouldn't apply - ANSWER Do your best to finish moving load where it was designated to go If load is undetermined who is to find out if load weight does not exceed crane rating at radius at which the load is to be lifted - ANSWER Person responsible for lift Where should climbing instructions be kept - ANSWER ...

Tower Crane Questions and Answers NCCCO Practice Exam Latest Which of the following OSHA regulations govern suspended personnel platforms? - CORRECT ANSWER-OSHA 1926.1431 According to ASME B30.3 The prohibited zone for power lines that are 60 kV is - CORRECT ANSWER-15 ft According to ASME B30.3, load hoist rotation resistant wire rope has a design factor of - CORRECT ANSWER-5 to 1 According to ASME B30.3 when Lifting a suspended personnel platform design factor for the rigging hardwar...

Where must the operator's manual be kept during crane operations? - The operator's manual should always be kept in the cab according to ASME B30.5, what are the minimal requirements to meet the crane operator qualifications? - Physical, Written test, Practical Test which will have the greatest effect to the fulcrum of a crawler crane and have a major impact on capacity? - working over the rear what hand signal must always be obeyed? - Stop When removing pins or bolts from a boom, assemb...

API 1169 Questions and Answers 100% Pass Which of the following equipment may NOT be required for a pressure test? internal line clamps before testing begins, a ________ with explanatory notes and data should be prepared pressure test procedure the pressure testing of newly constructed liquid pipelines and replaced segments of existing pipelinesshould be performed in accordance with ASME B31.4, 49 Code of Federal Regulations, Part 195 and any other applicable governmental regula...

API 653 2024 Exam Questions All Correctly Solved Fitness for Service (FFS) - Answer -Risked Based InspectionAPI 579 Risked Based Inspection - Answer -API 580 Low Pressure Storage Tanks - Answer -API 620 Cathodic Protection - Answer -API 651 Tank Bottom Linings - Answer -API 652 Welding on In-Service Equipment containing Flammables - Answer -API 2201 NDE Procedure Guidelines - Answer -ASME Sect V Acceptance Standards for RT, MT & PT's of Welds - Answer -ASME Sect 8, Div...

ASME B30.5 Correct Answer: Mobile and Locomotive cranes, all types ASME B30.3 Correct Answer: Tower Cranes ASME B30.23 Correct Answer: Personel Lifting Regs OSHA 29 CFR 1926.1400 Series Correct Answer: Cranes & Derrick's used in Construction regs. Rotation Resistant Wire Rope Correct Answer: 2 randomly broken wires in 6 diameters. 4 randomly broken wires in 30 diameters. 2 Safety factor 5.0 Safety factor personel lifts 10-1 ASME B30.9 Correct Answer: Slings Personel Platforms ...

Which of the following is a term used to describe a body harness used in conjunction with a shock absorbing lanyard? CORRECT ANSWER Personal fall arrest system A mechanic is working on a construction job, and finds the carpenter using a powder activated tool to anchor wall track. Of the following, which precaution should the mechanic take? CORRECT ANSWER Wear hearing protection Which is the best way to communicate with your coworkers while you are in the machine room and they are working i...

Mark's API 510 STUDY GUIDE EXAM QUESTIONS AND ANSWERS 100% VERIFIED Which of the following activities is NOT included in the scope of API 510? - A) rerating a vessel - B) Operating a vessel. - C) replacing a vessel head - D) internally inspecting a vessel - answerB Which of the following activities is NOT included in the scope of API 510? - A) setting relief device intervals - B) performing vessel alterations - C) Performing vessel fabrication - D) performing vessel maintenance - an...