Cwb level 2 exam 2024 Study guides, Class notes & Summaries

CWB Level II Exam 2024/2025 (100%Verified Answers) Latest Update. What is the term used to describe the following condition of lost corrosion resistance? "When certain stainless steels are heated between 500-850° C, carbides form at the grain boundaries and cause a local depletion of chromium." (A) Oxidization (B) Increased toughness (C) Solution heat treatment (D) Sensitization - Correct Answer-(D) Sensitization Note: Also known as "carbide precipitation" -- Chromium binds to carbi...

CWB Level 2 MODULE 8 INTRODUCTION TO METALLURGY & MATERIAL SPECIFICATION QUESTIONS WITH 100% VERIFIED CORRECT ANSWERS 2024 Exam Question Section 3 From the following, select the ferrous metals; a) wrought iron b) copper c) aluminum d) carbon steel e) stainless steel a) wrought iron d) carbon steel e) stainless steel Exam Question Section 3 What is taconite? a) aluminum alloy b) stainless steel c) pig iron d) iron ore e)...

CWB Level 2 Closed Book exam | Questions and Correct Answers 2024/2025 | Graded A+ To measure the strength of a welded joint what mechanical test would you prescribe? a) A transverse weld tension test. b) A charpy test. c) A CTOD test. d) An all weld metal tension test. e) A side bend test. - Answer -a) A transverse weld tension test. Select the cutting process that would provide the narrowest heat affected zone when cutting 12.5 mm (0.5 in) thick carbon steel. a) Oxy-acetylene cutti...

CWB Level 2 exam | Questions and Correct Solutions | Latest Update 2024/2025 | Graded A+ What are the 5 main categories for LP indications - Answer -1. Continuous Line 2. Intermittent Line 3. Rounded 4. Small Dots 5. Diffused or weak surface tension - Answer -property of a liquid that tends to reduce the area of the surface contact angle - Answer -the angle that the base of a drop of water makes with the surface it is on If a Liquid has good wetting it has a _________ Contact Angle ...

CWB Level II Exam 2024/2025 (100%Verified Answers) Latest Update. What is the term used to describe the following condition of lost corrosion resistance? "When certain stainless steels are heated between 500-850° C, carbides form at the grain boundaries and cause a local depletion of chromium." (A) Oxidization (B) Increased toughness (C) Solution heat treatment (D) Sensitization - Correct Answer-(D) Sensitization Note: Also known as "carbide precipitation" -- Chromium binds to carbi...

CWB Level II Exam 2024/2025 (100%Verified Answers) Latest Update. What is the term used to describe the following condition of lost corrosion resistance? "When certain stainless steels are heated between 500-850° C, carbides form at the grain boundaries and cause a local depletion of chromium." (A) Oxidization (B) Increased toughness (C) Solution heat treatment (D) Sensitization - Correct Answer-(D) Sensitization Note: Also known as "carbide precipitation" -- Chromium binds to carbi...

CWB Level 2 Module 5 Power Sources for Welding exam | Questions and Correct Solutions Latest Update 2024/2025 | Graded A+ Guide Question - Section 2 "Electric current is readily conducted in metals (low resistance) because of the many free electrons" True or false - Answer -True Guide Question - Section 2 "Conventional current flow is from negative to positive" True or False - Answer -False Guide Question - Section 2 Materials that have a high resistance to current flow are call...

CWB Welding Inspector Level 1 Exam (Latest 2024 / 2025 Update) Questions and Verified Answers | 100% Correct | Grade A Q: From the welding problems identified below which one of the five does not fit the pattern established by the other four? a) Insufficient throat. b) Incorrect bevel angle. c) Loss of shielding gas. d) Improper fit up. e) Use of wrong consumable. Answer: a) Insufficient throat. Q: A 10 mm fillet weld has a nominal: a) Throat dimension of 10 mm. b) Area of 10 sq. mm. c) Leg size...

CWB Welding Inspector Level 2 Exam (Latest 2023/ 2024 Update) Questions and Verified Answers| 100% Correct| Grade A Q: Define Erosion-Corrosion? Answer: description of the damage that occurs when corrosion contributes to erosion by removing protective films or scales, or by exposing the metal surface to further corrosion under the combined action of erosion and corrosion. Q: What kind of units/equipment are affected by Erosion, Erosion-Corrosion? Answer: All types of equip...