Do pumper Study guides, Class notes & Summaries

Fire Apparatus DO - Pumper

DO Pumper CDC CCRE Review Practice Questions 2024. The lowest acceptable fuel gauge reading on a fire apparatus during inspection is: - correct answer at least 3/4-full. The rescue tool supply system equivalent of a junction box is called: - correct answer a manifold 3 conditions where you should drive your fire apparatus in low gear: - correct answer 1. Approaching an intersection 2. Travelling around a corner 3. Climbing a hill Three conditions to wearing your seat belt before an e...

Texas Commission on Fire Protection (TCFP) Driver/ Operator Test Questions and Answers 2024/2025 | 100% Verified | Graded. NFPA 1500 What was the first gasoline powered fire apparatus to discharge water by using a large soda acid extinguisher? Chemical Wagon The real breakthrough for today's modern fire apparatus came with the introduction of the __________________ which carried a booster tank, had a pump capacity of 250 gallons per minute or greater, and carried 21/2 inch and 11/2 inch h...

Fire Apparatus DO - Pumper

Pumper Driver Operator CDC Questions and Answers 100% Solved The steering wheel should not move more than __ degrees in either direction without turning front wheels ️️10 What is a engine belts proper tension ️️1/2-3/4 in at the deflextion point The weekly inspections all involve the _____ ️️Pump What do inverters do? ️️convert DC to AC power Rescue tools that are hydraulically driven lose significant pressure if the hose lines are.... ️️More than 100 ft

Main purpose of a pumper correct answers Provide adequate water pressure and effective water streams Watts for Trucks correct answers 12,000 Watts What do antilock brakes do? correct answers Keep vehicle from skidding How long for apparatus to build pressure when it first starts? correct answers 60 seconds Majority of tenders carry how much water? correct answers gallons Long idling leads to these 2 things correct answers carbon buildup, wear on pistons What uses a pressure se...

Pumper CDC Questions and Answers Fully Solved A fire apparatus should be started with all electrical switches in the OFF position in order to: Start the engine without a load. During an inspection of your fire apparatus, you should ensure that the foam level is: Full Match the location of each fire apparatus inspection item to the name that applies saddle tanks - 6 winch - 7 main hose bed - 2 automatic snow chains - 4 intake strainers - 5 ladders - 3 compartments - 1 ...

Which of the following is NOT a responsibility of the fire apparatus driver/operator? (7) A. Detailed maintenance procedures B. Operating the apparatus properly, swiftly, and safely C. Ensuring that the apparatus and the equipment it carries are ready at all times D. Safely transporting firefighters, apparatus, and equipment to and from the scene of an emergency or other call for service - A. Detailed maintenance procedures Which of the following is NOT a basis for promotion to drive...

IFSTA Pumping And Aerial DO 3rd Edition Ch.1.Prep Exam 2024. What is the main purpose of a fire dept pumper? - correct answer To provide adequate water pressure for effective fire streams Minimum pump capacity of pumper? - correct answer 750 gpm and water capacity of at least 300 gallons. Pump capacities larger than 750 gpm increase in increments of 250 gpm with most municipal fire departments operating pumpers of 2,000 gpm or less. Initial attack fire apparatus - correct answer A fire a...

In 1720 what was the piece of equipment to replace the bucket brigade? Hand Pump Which NFPA standard required new fire apparatus to be designed so that all members riding on the fire apparatus would be provided a seated area inside an enclosed cab? NFPA 1500 What was the first gasoline powered fire apparatus to discharge water by using a large soda acid extinguisher? Chemical Wagon The real breakthrough for today's modern fire apparatus came with the introduction of the _______________...