Fanuc test a - Study guides, Class notes & Summaries

FANUC SECE Practice Exam Test Correctly Answered. T/F: Dual Check Safety position/Speed features do not need additional external sensors to monitor speed and position - CORRECT ANSWER True What is the correct way to recover from a DCS Joint Position Check alarm? - CORRECT ANSWER Press SHIFT + RESET and then jog away from the limit. Which of the following allows you to enable DCS Cartesian Speed Check? - CORRECT ANSWER *Program instruction *Setting on the DCS Cartesian Speed Check menu...

FANUC SECE Test with Complete Solution T/F: Dual Check Safety position/Speed features do not need additional external sensors to monitor speed and position - - True What is the correct way to recover from a DCS Joint Position Check alarm? - - Press SHIFT + RESET and then jog away from the limit. Which of the following allows you to enable DCS Cartesian Speed Check? - - *Program instruction *Setting on the DCS Cartesian Speed Check menu *System Variable setting **All of the above** The ...

FANUC Robot Certification Test Questions and Answers What two buttons are pressed to display the JOG menu? - Answer-SHIFT + COORD Name the two methods for setting a TOOL frame. - Answer-3-point method 6-point method Name the three ways of defining a USER frame. - Answer-3-point method 4-point method Direct Entry Method How do you access TOOL frame settings? - Answer-Menu Setup Frames select TOOL frame Press method and select 3 point or 6 point Using 3-point method, how...

Fanuc NOCTI Training fully solved 2024what does DCS stand for - correct answer Dual Check Safety DCS consists of what 3 safety functions - correct answer Emergency Stop Control, Position/Speed Check What are the Major axes - correct answer 1,2,3 What are the minor Axes - correct answer 4,5,6 List the 3 controller sizes - correct answer A,B, Mate Controller A controller can support how many Robots - correct answer 4 A controller can control how many motion groups - correc...

FANUC Post Exam Questions Test Answers. Enabling the iPendant gives motion solely to whom? A. The PLC B. The Controller C. The Operator D. Andy from accounting - CORRECT ANSWER C. The Operator (person with the pendant) Assuming standard setup, if you jog the robot in World -Y which direction will the TCP move? A. Straight up B. Up C. To the robots right D. To the robots left - CORRECT ANSWER C. To the robots right What key is depressed to switch between the different jog m...

Fanuc Visioning Review Practice Test. A multiplexer board is required if - CORRECT ANSWER Two or more Sony XC-56 camera are being used To use iRVision you need a dedicated computer to constantly monitor the vision system? - CORRECT ANSWER false The vision calibration grid is used to: - CORRECT ANSWER Calibrate the camera The only method for communication between the R-30iB robot and the iRVision computer is: - CORRECT ANSWER Ethernet All Dip switched on the camera need to be off a...

FANUC Cert Final Test with 100% Correct Answers. List the Major Axis - CORRECT ANSWER J1, J2, J3 List the Minor Axis - CORRECT ANSWER J4, J5, J6 Identify the Components of the SOP - CORRECT ANSWER 1. Fault Reset 2. Cycle Start 3. Fault LED 4. Power LED 5. E-STOP 6. Mode Switch 7. Hour Meter Which mode limits all cartesian speed to less than 250 mm/sec and joint speed to less than 10%? - CORRECT ANSWER T1 Mode Enabling the iPendant gives motion control solely to whom? - COR...

FANUC Chapter 9 Review Practice Test. A Motion Group can define different groups of ____________ that can be driven by FANUC America Corporation servo motors used for independent pieces of equipment. - CORRECT ANSWER Within the program header, what does Group Mask represent when it displays the following? [1,*,*,*,*,*,*] - CORRECT ANSWER

Fanuc Section 1 - Robot Operations Study Guide Test. people - CORRECT ANSWER When prioritizing the safety of your robotic system, the # 1 consideration should always be A) robot(s); B) workpiece; C) tooling; D) people; E) external devices servo motors - CORRECT ANSWER The controller contains the computer that operates the robot. Which of the following is NOT housed within the controller? A) memory; B) control circuitry; C) operator controls; D) servo motors helpful when ...

FANUC Robot Test 1 Questions with Answers When using the "Right Hand Rule", the Thumb represents - Answer-Z Axis To fix a DEADMAN Error press the Deadman Switch, Shift and - Answer-Reset What button must be pressed prior to jogging the robot in joint mode? - Answer-SHIFT Based on the guidelines for naming teach pendant programs (TPP), this name would be considered acceptable - Answer-PROG1 Based on the guidelines for naming teach pendant programs (TPP), this name would NOT be con...