Gen bus 3 - Study guides, Class notes & Summaries

GEN BUS 301 - EXAM 1 QUESTIONS WITH CORRECT ANSWERS.

Which items should not be reset after the failure message? Pro gen p7 - CORRECT ANSWER 1. Bleed Valve pb for BLEED LEAK 2. GEN pb for BUS FAULT 4 items should not be reset until QRH directs to. - CORRECT ANSWER 1. ECU / EEC 2. PEC 3. CAB press MODE SEL 4. BAT CHG Can we reengage The CB of FUEL PUMP? - CORRECT ANSWER No DC GEN 1+2 fault memory items - CORRECT ANSWER 1. PF as CM1 2. DC GENs reset 3. If no GEN recovers 4. HYD Green pump off 5. TRU on If ...

FAM3102 Practice Test Questions and Answers All Correct When should you use the OIL SYSTEM MALFUNCTION OR LOW OIL PRESSURE? - Answer- 1. Red OIL PX annunciator illuminated 2. Amber OIL PX annunciator illuminated 3. Oil Pressure Fluctuations 4. Oil Temperature out of limits 5. Visibly confirmed leaking oil What does the FUEL PX annunciator indicate? - Answer- The engine driven high pressure fuel pump is suction feeding; Engine operation with the pump suction feeding is limited to 10 hou...

Spirit Airlines Recurrent Exam Questions And Answers (Verified And Updated) -Two pink lights flash on all call panels -EMERGENCY CALL appears on all attendant indication panels -High/low chimes sound on loudspeakers 3 times - answerWhat happens when a pilot presses the EMER pushbutton? What happens when a F/A presses the EMER pushbutton? - answer-White EMER ON and Amber CALL -Amber ATT -3 long buzzers -EMER Call on F/A stations Crew Supply pushbutton does what? - answerOpens valve to ...

PJM 2024 Questions and Answers Graded A+ During System Restoration, what is the optimal Frequency Range? 59.75 - 61 Hz The 500 kV system has normal bus voltages between? 500 to 550 kV When Connecting 2 islands, the operator must match? Voltage, Phase Angle and Frequency What are the Minimum Source Requirements-(500kV+) for a 500 kV? 30 MW Gen/mile of energized 500 kV and 20 MW Load/mile of energized 500 kV When will PJM issue a Minimum Generation Alert? When expected generatio...

During System Restoration, what is the optimal Frequency Range? : 59.75 - 61 Hz The 500 kV system has normal bus voltages between? : 500 to 550 kV When Connecting 2 islands, the operator must match? : Voltage, Phase Angle and Frequency What are the Minimum Source Requirements-(500kV+) for a 500 kV? : 30 MW Gen/mile of energized 500 kV and 20 MW Load/mile of energized 500 kV When will PJM issue a Minimum Generation Alert? : When expected generation levels fall within 2500 MW of normal op...

PJM Transmission Exam Study Questions and Answers During System Restoration, what is the optimal Frequency Range? - Correct Answer ️️ -59.75 - 61 Hz The 500 kV system has normal bus voltages between? - Correct Answer ️️ -500 to 550 kV When Connecting 2 islands, the operator must match? - Correct Answer ️️ -Voltage, Phase Angle and Frequency What are the Minimum Source Requirements for a 500kV line? (Gen/mile and load/mile) - Correct Answer ️️ -30 MW Gen/mile of energized...

PJM Transmission Exam Study Guide | Questions with 100% Correct Answers During System Restoration, what is the optimal Frequency Range? ANS-59.75 - 61 Hz The 500 kV system has normal bus voltages between? ANS-500 to 550 kV When Connecting 2 islands, the operator must match? ANS-Voltage, Phase Angle and Frequency What are the Minimum Source Requirements for a 500kV line? (Gen/mile and load/mile) ANS-30 MW Gen/mile of energized 500 kV and 20 MW Load/mile of energized 500 kV When will ...

Falcon 2000 Electrical Exam Questions and Answers All Correct What provision does the logic provide allowing the entire aircraft to remain powered if Generator 1 power is lost during a critical phase of flight? - Answer- If the slats are extended (critical phase), the LH/ESS bus tie will remain closed powering the left main bus with the battery bus If Generator 2 power is lost in flight with all switches in their normal position, what is lost regarding the electrical system? - Answer- With ...