The gauge is defective - Study guides, Class notes & Summaries

They type of brake fluid recommended for use in the master cylinder is ____________ DOT 3 DOT 4 DOT 4 + or LV Any of the above depending on the vehicle - Any of the above depending on the vehicle Why is a scan tool needed when checking the level of automatic transmission fluid? To determine the fluid temperature To check for any stored diagnostic trouble codes To check which solenoids inside the transmission/transaxle are active To determine the fluid capacity - To determine the fluid t...

Technician A only A technician connects one lead of a DMM (digital multimeter) to the positive (+) terminal of a battery and the other meter lead to the "B" terminal of the starter solenoid and then cranks the engine. During cranking, the voltmeter displays a reading of 878 mV. Technician A says this reading indicates the positive battery cable has very high resistance. Technician B says this reading indicates that the starter armature is defective. Who is right? Technician A only Tec...

Millwright Level 1 Exam Questions and Answers Latest | Graded A+. On a pedestal grinder, the gap between the grinding wheel and work rest should not exceed: - ANSWER 1/8 inch The kind of abrasive material used in grinding wheels for general purpose applications is: - ANSWER aluminum oxide A blotter is used on a grinding wheel to: - ANSWER protect the flanges from the abrasize grit, display information about the wheel and compensate for the uneven surfaces on the wheel Flanges should at l...

ASE Certification Practice Exam Both b and c - Answer ️️ -Coolant should be tested for ________. Proper color Freezing point (temperature) Specific Gravity Both b and c Both technician a and b - Answer ️️ -Two technicians are discussing a compression test. Technician A says that the engine should be cranked over with the pressure gauge installed for "4 puffs." Technician B says that the maximum difference between the highest reading cylinder and the lowest reading cylinder sho...

FDNY COF P-98 Exam With 100% Correct Answers Latest Updated 2024 (Already Graded!!) Where generally *Fuel-oil is used in buildings?* What purposes?* - Correct AnswerIs used in *Stationary Equipments*, Two purposes: a) *Fuel Emergency Generators* b) *Fuel Equipment used to heat the building* 2.- What *COF is required* to supervise the *Fuel-oil transfer in the building from one floor to another?* - Correct Answer-*P-98 and maintain all qualifications and comply w/ requirements applicable to...

ASE Certification Practice Exam Both b and c - Answer ️️ -Coolant should be tested for ________. Proper color Freezing point (temperature) Specific Gravity Both b and c Both technician a and b - Answer ️️ -Two technicians are discussing a compression test. Technician A says that the engine should be cranked over with the pressure gauge installed for "4 puffs." Technician B says that the maximum difference between the highest reading cylinder and the lowest reading cylinder sho...

Millwright Level 1 Exam Questions With Correct Answers Latest (Graded A+) The kind of abrasive material used in grinding wheels for general purpose applications is: - ANSWER aluminum oxide A blotter is used on a grinding wheel to: - ANSWER protect the flanges from the abrasize grit, display information about the wheel and compensate for the uneven surfaces on the wheel Flanges should at least be: - ANSWER 1/3 the diameter of the wheel The best wheel to use for cleaning scale and dirt off ...

NICET Level 2 ITM of Water Based Systems Exam Questions and Answers When placing a LOTO on a system, how many locks should be applied? - Answer-As many locks as their are personnel working on the system. A ladder must be able to support ____ times the weight of the expected load - Answer- 3.3 It is acceptable to enter into a confined space without an attendant, but only if all other precautions and PPE are taken. - Answer-False A defective air pressure gauge on the supply air of a dry pi...

For most communities, how far should a private well be located from a septic system? a. 18' to 20' b. 30' to 40' c. 50' to 70' d. 75' - 100' - ANSWER D What is a symptom of a water logged pressure tank? a. The pressure gauge doesn't work b. The pump runs constantly c. The pump vibrates too much d. The tank returns to the high limit too fast - ANSWER B If, during a test of the well equipment, the pressure comes up over the preset high limit, what might be the problem? a. T...

The Plumbing Inspection: AHIT Questions with Accurate Answers 2024 Which of the following does NOT have to be inspected during the plumbing inspection? A. fire and lawn sprinkler systems B. fixtures and faucets C. water heating equipment D. supply and drain, waste, and vent (DWV) piping A. fire and lawn sprinkler systems Which action IS required by most standards of practice during the plumbing inspection? A. required to operate automatic safety controls B. required to observe...