What is the wheel chock - Study guides, Class notes & Summaries

True/False: A PAC3 Patriot GM is free to move in the canister if the Torque Tube Handle is not properly locked? correct answers False According to TM 9-2320-423-10, how many controls levers are there for the crane on the GMT HIAB Remote-Control Unit? correct answers Five (5) The ATLAS 10k Forklift has a Frame Oscillation feature; how far (in degrees) can the frame oscillate left or right? correct answers 09 degrees When conducting GMT reload, when must the ground be connected to the can...

Which of the following should you NOT do while unloading a vehicle from a car carrier? a. Park the car carrier in a position that is level B. Leave adequate space at the rear when parking C. Position wheel chocks on the sides of the rear wheels of the car carrier D. Tilt the bed so the loaded vehicle is on a slight incline - Correct Answer-C Where should you not stand when the bed is in a loaded tilted position? A. In front of the bed B. Behind the bed C. The right side of the bed D. Th...

Where should piston ring gaps be installed relative to each other , and why ? Compression ring gaps should be staggered so that they do not align . This prevents blow - by . On engines equipped with hydraulic valve lifters , what should the running valve clearance be ? Zero Brainpower Read More Previous Play Next Rewind 10 seconds Move forward 10 seconds Unmute 0:03 / 0:15 Full screen What indications are given in the event of a leaking or open primer while the engine i...

Michigan Airbrake CDL Test |Complete Questions with A+ Graded Answers The air brake system on a commercial motor vehicle is comprised of three separate systems. Can you name them? Service, Parking, Emergency brake system How often should the air tank be drained in the air brake system? If it is a manual drain valve, it should be drained of water and contaminants at the end of every day's driving. At what PSI does the air compressor "cut out"? The air compressor will shut down or...

Florida Pump Operator Exam Questions And Answers 100% Verified ____________reduces the possibility of an apparatus going into a slide, jackknife, or spin during heavy braking - answerABS Railroad companies advise that vehicles be kept at least __________ from tracks. - answer25 feet(7.5m) What should D/O check in regards to tires on apparatus? - answer-Check the tire type, condition, and inflation. Ensure not a mix of radial and bias-ply tires. -Too much or too little tire pressure will ...

Florida Pump Operator Exam Questions And Answers 100% Verified ____________reduces the possibility of an apparatus going into a slide, jackknife, or spin during heavy braking - answerABS Railroad companies advise that vehicles be kept at least __________ from tracks. - answer25 feet(7.5m) What should D/O check in regards to tires on apparatus? - answer-Check the tire type, condition, and inflation. Ensure not a mix of radial and bias-ply tires. -Too much or too little tire pressure will ...

NYS Tow Truck Endorsement Practice Test Marathon, With Complete Solution. Which of the following if the correct definition of a tow truck? A. A motor vehicle that tows or carries a disabled illegally parked motor vehicle B. A motor vehicle that tows or carries a disabled illegally parked or abandoned motor vehicle or a motor vehicle involved in an accident C. A motor vehicle that tows or carries a legally parked or abandoned motor vehicle or motor vehicle involved in an accident D. A mo...

CDL Air Brakes |Complete Questions with Graded A+ Answers After every working day Oil and water usually collect in compresed air tanks. If you do not have an automatic tank drain, when should you drain the air tanks? Why drain water from the compressed air tanks? Water can freeze in cold weather and cause brake failure. The air brake system for a straight truck or bus should not leak at a rate of more than __________ psi per minute with the engine off and the brakes released. 2 ...

Brake test questions and answers Graded A+ 1) Why must air tanks be drained? a) For pre trip inspection purposes b) To check for leaks c) To release oil and water buildup d) To activate the low air pressure alarm c) To release oil and water buildup 2) What is a supply pressure gauge used for? a) To check tire pressure b) To check tank pressure c) To activate the low pressure alarm d) To check for leaks b) To check tank pressure 4) What are spring brakes? a) Hydraulic brakes...

FSVO Il State Exam Questions With Answers Latest 2024/2025 (100% Correct) Stopping distance - ANSWER The distance it takes for you to recognize the hazard, process the need to stop, apply the brakes, and come to a complete stop. Reaction distance - ANSWER The distance the fire apparatus ravels after you recognize the hazard, remove your foot from the accelerator, and apply the brakes. Braking distance - ANSWER The distance the fire apparatus travels from the time that the brakes are activa...