A circular mil - Study guides, Class notes & Summaries

Master Electrician VERIFIED ARELEADY PASSED TEST That portion of a wiring system extending beyond the final overcurrent device is called the: - ANSWER branch circuit The final sum of the computed loads, based on the minimum code requirements, is the - ANSWER Calculated load As compared to #10, a #8 wire of the same Iength has less: - ANSWER Resistance One circular mil is the area of a circle whose diameter is: - ANSWER 0.001 inch A round bus-bar one inch in diameter, has a circul...

branch circuit - ANSWER-That portion of a wiring system extending beyond the final overcurrent device is called the: Calculated load - ANSWER-The final sum of the computed loads, based on the minimum code requirements, is the Resistance - ANSWER-As compared to #10, a #8 wire of the same Iength has less: 0.001 inch - ANSWER-One circular mil is the area of a circle whose diameter is: 1,000,000 CM - ANSWER-6. A round bus-bar one inch in diameter, has a circular mil area of: four time...

NCCER Exam Test Questions & Correct Answers A UL listed rod type grounding electrode must have a MINIMUM length of: a) 6' b) 8' c) 10' d) 20' - ANSWER : 8' What is the MINIMUM number of overload sensing units required for all three phase motors? a) 0 b) 1 c) 2 d) 3 - ANSWER : 3 In a circuit of pure capacitance, the current leads the voltage by an angle of: a) 30-degrees b) 45-degrees c) 90-degrees d) 180-degrees - ANSWER : 90-degrees The standard unit for measuring t...

Rodeo Test Exam Questions With 100% Correct Answers When digging by hand you should outline the hole around the stake. The diameter of the hole should be at least ____ greater than the diameter of the butt of the pole. - answerD) 6 inches ____ polarity is standard for all single-phase distribution transformers 200 KVA and below having high-voltage ratings of 9,000 votls and below. - answerA) Additive What does the acronym ANSI stand for? - answerAmerican national standards institute When ...

Journeyman Electrician #5 | Questions and Correct Answers | Latest Update 2024/2025 | Graded A+ Unless listed and identified otherwise, terminations and conductors of sizes 14 AWG through 1 AWG shall be rated at _____. a) 75°C b) 75°F c) 90°C d) 60°C - Answer -D: 60°C Ref: 110.14(C)(1)(a)(1) The MINIMUM size copper equipment bonding jumper on the supply side of a service consisting of parallel copper phase conductors with a total circular mil area of 2000 kcmil shall be ____.a)...

A UL listed rod type ground electrode must have minimum length of - 8'' in a circuit of pure capacitance, the current leads the voltage by - 90 degrees The standard unit for measuring the cross sectional area of wire is the - circular mil the drawing scale is most likely to be found in the - drawing title block what is the minimum number of overload sensing units required for all three phase motors - 3 what is the resultant distance between center bends for a 10-inch offset at 15 degrees ...

In a guardrail system, the guardrails can be made of any of the following EXCEPT: ropebanding If the potential across the circuit is 48 volts and the current is 5 amps the resistance of the circuit is: 9.6 ohms A UL listed rod type grounding electrode must have a minimum length of: 8' What is the MINIMUM number of overload sensing units required for all three phase motors? 3 In a circuit of pure capacitance, the current leads the voltage by an angle of: 90-degrees 2 0 2 4 /20...

The electrical NCCER test Questions All Solved Correctly Which Article of the NEC covers grounding? - Answer -article 250 Which of the following is a 90 degree, explosion proof fitting? - Answer -GUAL What is a dropout plate? - Answer -Metal plate with a curved surface for cable to follow as it passes from the tray All of the following are common service voltages in the United States EXCEPT: - Answer -372/575 3-PHASE, 4-WIRE What does a GFCI breaker do? - Answer -Opens a circuit t...

branch circuit - ANSWER-That portion of a wiring system extending beyond the final overcurrent device is called the: Calculated load - ANSWER-The final sum of the computed loads, based on the minimum code requirements, is the Resistance - ANSWER-As compared to #10, a #8 wire of the same Iength has less: 0.001 inch - ANSWER-One circular mil is the area of a circle whose diameter is: 1,000,000 cm - ANSWER-A round bus-bar one inch in diameter, has a circular mil area of: four times a...

Electrical NCCER test Questions and Correct Answers GRADED A+ In a guardrail system, the guardrails can be made of any of the following EXCEPT: - ANS ropebanding If the potential across the circuit is 48 volts and the current is 5 amps the resistance of the circuit is: - ANS 9.6 ohms A UL listed rod type grounding electrode must have a minimum length of: - ANS 8' What is the MINIMUM number of overload sensing units required for all three phase motors? - ANS 3 In a circu...