Ase brake 2025 - Study guides, Class notes & Summaries

ASE A5 Brakes Practice Test -Section 1- Hydraulic System DIagnosis and Repair Exam Questions and Answers A spongy brake pedal may be caused by: - Ans:-Air in the hydraulic system d - Air causes a gap in the hydraulic fluid flow because the fluid has to compress the air before it can apply the piston. This delay causes the spongy feel. The other choices do not affect this concern. This question is not like the others. It has the word EXCEPT. For this question, look for the choice that coul...

ASE MLR EXAM PRACTICE QUESTIONS AND ANSWERS Tech observes that the brake fluid level is at the "Min" mark in the master cylinder reservoir. Tech A says that worn front pads could be the cause. Tech B says that a leak in the brake hydraulic system could be the cause. Who is right? (1) - Ans:-Both A and B (1) The tires of a vehicle are being rotated and balanced. Tech A says that the wheel weight retaining clips must be matched to the rim profile. Tech B says that the directional tires...

ASE A5 Practice Test (Brakes) | Questions and Correct Answers | Latest Update 2024/2025 A spongy brake pedal may be caused by: a. ABS Diagnostic Trouble Code set b. Frozen caliper piston c. Defective metering valve. d. Air in hydraulic system - Answer -D This question is not like the others. It has the word EXCEPT. For this question, look for the choice that could NOT cause the described situation. Read the entire question carefully before choosing your answer. A vehicle has a very er...

ASE MLR Certification Test Questions and Answers Both A and B - Ans:-Technician observes that the brake fluid level is at the "Min" mark in the master cylinder reservoir. Tech A says that worn front pads could be the cause. Tech B says that a leak in the brake hydraulic system could be the cause. Who is right? A only - Ans:-The tires of a vehicle are being rotated and balanced. Tech A says that the wheel weight retaining clips must be matched to the rim profile. Tech B says that direc...

ASE exam study guide questions & answers 2024/2025 Spark plugs are being replaced on a v6 engine. Which of the following should be performed before removing the boot? - ANSWERSTwist the boot 1/2 a turn Technician A days that a positive crankcase ventilation (pvc) system reduces vehicle emissions. Tech B says that a pvc system helps increase crankcase pressure. Who is correct? - ANSWERSTech A Tech A says that secondary ignition wires should be inspected when replacing spark plugs. Tech...

ASE Prep - EBCS, ABS, TCS, & ESC Exam Practice Questions and Answers The wiring harness from the right front ABS wheel speed sensor to the harness connector is badly damaged from corrosion, exposing the wires. Technician A says to carefully clean the damaged section and wrap the damaged area with black tape. Technician B says a badly corroded harness should be replaced. Who is correct? A only B only Both A and B Neither A nor B - Ans:-B only A diagnostic trouble code (DTC) representing...

ASE A5 Practice Test - ASE A5 Brakes Test Prep - Test Prep 2 Practice Questions and Answers Technician A - Ans:-A front wheel drive vehicle with four wheel disc brakes is pulling to the left. Technician A says an external kink or internal restriction in the LF brake line will result in this condition. Technician B says to use a compression fitting to repair a section of brake line. Who is correct? A. Technician A B. Technician B C. Both A and B D. Neither A nor B Technician B - Ans:-The...

ASE Test Prep - A5 Brakes - Practice Test #3 Questions and Answers The master cylinder should be bench bled prior to installation - Ans:-When replacing the master cylinder, which of the following is a true statement? A. Wheel cylinders must also be replaced B. The power brake booster should always be replaced at the same time C. Calipers should be replaced as well D. The master cylinder should be bench bled prior to installation Technician B only - Ans:-Technician A says when testing the...

ASE B6 Test - Damage Analysis & Estimating Practice Questions and Answers What is the difference between a unitized frame and a uni-body? - Ans:-There is no difference. In a uni-body or unitized vehicle, the frame and body are incorporated into a single welded structure. Should exhaust damaged systems be welded and repaired, or replaced all together? - Ans:-Replaced. Exhaust gases contain poisonous carbon monoxide and leaks could create dangerous conditions for passengers. The "Inside ...

ASE A5 Practice Test Brakes | Questions and Verified Answers | Latest Update 2024/2025 A vehicle with ABS anti-lock brakes has an audible clicking noise when it is first started. The noise goes away after a few seconds. Technician A says this is one of the hydraulic valves in the hydraulic valve assembly sticking. Technician B says this is a normal condition. Who is correct? - Answer -TECH B is correct. The ABS system runs a system check when the key is first turned to the ON position. T...