Epa 608 type - Study guides, Class notes & Summaries

EPA 608 Type 2 certification Exam Questions with Verified Answers . When a new system has been assembled, the first thing to do is? Pressurize the system with an inert gas & leak check. After installation of a field-piped R-410A split heat pulp, the unit should first be? Pressurized with nitrogen then leak checked. The EPA regulations require that any appliances containing more than 50 pounds of refrigerant (except for commercial & industrial process refrigeration) must be repaired when ...

EPA 608 Type 3 exam with 100% Complete Solutions. On low pressure chillers, moisture typically enters the refrigerant system through air leaks from areas with gaskets or fittings The maximum test pressure for leak testing a low pressure centrifugal is: 10 psig Leak test and repair the chiller to reduce refrigerant loss from a pruge unit on CFC-11 chiller ... A hydrostatic tube test kit is used to: determine if a tube leaks Commercial and industrial process refrigeration systems must be ...

What date was the sale of CFC's & HCFC's restricted to technicians certified in refrigerant recovery? - Correct answer-November 14, 1994 Section 608 of the Federal Clean Air Act requires technicians to what? - Correct answer-Recover all refrigerants. The objective of the Clean Air Act is to protect what? - Correct answer-The earth's stratosphere. HFC's - Correct answer-HydroFlouroCarbon's CFC's - Correct answer-ChloroFluoroCarbon's ODP - Correct answer-Ozone Depletion Potential Which in...

EPA 608 TYPE 2 TEST ACTUAL EXAM 210 QUESTIONS AND CORRECT DETAILED ANSWERS WITH RATIONALES (VERIFIED ANSWERS) |ALREADY GRADED A+

EPA 608 TYPE 1 TEST ACTUAL EXAM 200 QUESTIONS AND CORRECT DETAILED ANSWERS WITH RATIONALES (VERIFIED ANSWERS) |ALREADY GRADED A+

EPA 608 TYPE 3 TEST ACTUAL EXAM 210 QUESTIONS AND CORRECT DETAILED ANSWERS WITH RATIONALES (VERIFIED ANSWERS) |ALREADY GRADED A+

EPA 608 Type III Accurate Questions & Answers!!EPA 608 Type III Accurate Questions & Answers!! How is frost best removed from a sight glass? What do R-11 and R-123 refrigerants have in common? A. They are oxygen depleting B. They are Class I and II substances as defined by the EPA C. Both A and B D. Neither A nor B - ANSWER C. Both A and B What is the required evacuation level for recovering refrigerant from a low-pressure appliance with a recovery machine manufactured before Novemb...

EPA 608 Type II Test with 100% correct answers 2024 Questions and Answers 2024 / 2025 (Verified Answers by Expert)

EPA 608 Type 2 Exam Questions with Verified Answers . When a new system has been assembled, the first thing to do is? Pressurize the system with an inert gas & leak check. After installation of a field-piped R-410A split heat pulp, the unit should first be? Pressurized with nitrogen then leak checked. The EPA regulations require that any appliances containing more than 50 pounds of refrigerant (except for commercial & industrial process refrigeration) must be repaired when the leak rate ...

The primary water source for cooling the condenser of a water-cooled recovery unit is: - local municipal water supply Which of the foloowing repairs would ALWAYS be considered "major" under EPA's - replacement of evaporator coil According to ASHRAE Guideline 3-1996, if the pressure in a system rises from 1 mm Hg to a level above ____ during a standing vacuum test, the system should be checked for leaks. - 2.5 mm Hg On low pressure chillers, moisture typically enters the refrigerant syst...