Fuel tanks - Study guides, Class notes & Summaries

The person supervising the Fuel-Oil transfer in the building from one floor to another must hold what type of certificate of fitness - P-98 Certificate of Fitness In designing the fuel-Oil transfer system, such as diesel #2 oil from the lowest floor to the floor above the tank level, the following factors must be considered: - - Maximum inlet suction an flow-rate - Design of oil piping system and discharge pressure - Proper control strategy _______________________ fires are caused by ordi...

FDNY COF P-98 Questions and Answers 100% Pass 1.- Where generally Fuel-oil is used in buildings? What purposes? Is used in Stationary Equipment Two purposes: a) Fuel Emergency Generators b) Fuel Equipment used to heat the building 2.- What COF is required to supervise the Fuel-oil transfer in the building from one floor to another? - P-98 and maintain all qualifications and comply w/ requirements applicable to such certificate holder - The P-98 COF is premise-related 3.- The use...

The fuel tanks on the CRJ-700 are called: correct answers Left, center, right, and collector Where does a motive flow pump get the high pressure energy to operate? correct answers Engine driven pump What two methods do we have for cross feeding fuel correct answers Gravity, powered What are two ways are we capable of cross feeding fuel correct answers Push button, or automatic How many ACMPs do we have in the fuel system correct answers 4 How many ejectors/motive flow pumps do we ...

A confined space is: Not meant for continuous employee occupancy Limited in entry and exit Large enough so that an employee can enter and perform work All of the above ~~> (d) All of the above All of the following are not exempt from UST regulations EXCEPT: Heating oil tanks Waste oil tanks Motor vehicle fuel tanks Aviation fuel tanks ~~> (a) Title 23 CCR sec 2621(a)(2) The following is an approved quantitative method of non-visual monitoring for existing UST systems: Gro...

In an electric circuit for the wattage to remain the same if the voltage drops, the amperage must - Increase Atomizing type burners were designed to burn which type of fuel - Type 2 fuel oil Pour point problems with outside above ground fuel tanks can be partially relieved by - Reducing the pour point of No. 2 fuel oil by blending it with No. 1 fuel oil. A fuel oil storage tank cannot be installed - In the furnace room with 5' of heating unit. The primary purpose of a fuel pump on a high-...

ISQS 2340 Exam 3 Benjamin Mitchell TTU; Questions & Answers 100% Solved According to the prep material for the 3D Printing topic, which of the following are applications of 3D printing today? Select all that apply. Aerospace manufacturing parts such as rocket fuel tanks Prototyping Medical device solutions Manufacturing large entertainment models Correct answer-- Aerospace manufacturing parts such as rocket fuel tanks - Prototyping - Medical device solutions - Manufacturing large ...

1.- Where generally Fuel-oil is used in buildings? What purposes? - ANSWER Is used in Stationary Equipment Two purposes: a) Fuel Emergency Generators b) Fuel Equipment used to heat the building 2.- What COF is required to supervise the Fuel-oil transfer in the building from one floor to another? - ANSWER - P-98 and maintain all qualifications and comply w/ requirements applicable to such certificate holder - The P-98 COF is premise-related 3.- The use of the word should refers to: - ...

How often shall fuel-oil storage tanks and piping be inspected for leaks? - ANSWERWeekly. For what two purposes is fuel-oil generally used in buildings? - ANSWER(1) Emergency generators. (2) Heat. How often shall fuel-oil storage tanks have their float switches tested? - ANSWERWeekly. Fuel-oil transfer shall be conducted under the ____ supervision of a P-98 COF holder. - ANSWERGeneral. Fuel-oil system testing shall be conducted under the ____ supervision of a P-98 COF holder. - AN...

FDNY COF P-98 QUESTIONS AND ANSWER 100% ACCURATEFDNY COF P-98 QUESTIONS AND ANSWER 100% ACCURATEFDNY COF P-98 QUESTIONS AND ANSWER 100% ACCURATE 1.- Where generally *Fuel-oil is used in buildings?* What purposes?* - ANSWER-Is used in *Stationary Equipments*, Two purposes: a) *Fuel Emergency Generators* b) *Fuel Equipment used to heat the building* 2.- What *COF is required* to supervise the *Fuel-oil transfer in the building from one floor to another?* - ANSWER-*P-98 and maintain all qu...

How often shall fuel-oil storage tanks and piping be inspected for leaks? - ANSWERWeekly. For what two purposes is fuel-oil generally used in buildings? - ANSWER(1) Emergency generators. (2) Heat. How often shall fuel-oil storage tanks have their float switches tested? - ANSWERWeekly. Fuel-oil transfer shall be conducted under the ____ supervision of a P-98 COF holder. - ANSWERGeneral. Fuel-oil system testing shall be conducted under the ____ supervision of a P-98 COF holder. - AN...