Hoisting license 2a 1c - Study guides, Class notes & Summaries

Massachusetts 2a Hoisting License Questions And Answers Latest Updated 2024/2025 | Scored A+. What is the purpose of the swing gear on an excavator: answer- It connects the car body to the tracks 2. Who is responisble for inspecting a trench before anyone goes in it: answer- The equipment operator 3. What is the prefered sling angle: answer- 60* 4. The top of the spoil pile is called: answer- The crown 5. A four footbdeep trench requires an additional ladder for each _ of open trench: ans...

2A/1C Hoisting License MA Latest Update with Verified Solutions How many pounds are in a ton? 2,000 pounds How close can you mechanically dig to a known utility? 18 inches When driving a loader down hill, what should you not do? Raise the bucket or put the machine in neutral When filling a trench should you use the backhoe bucket in a sweeping motion? No it can cause mechanical failure What are the 3 points of contact? Two feet one hand, or two hands one foot, on the ladder at ...

MASSACHUSETTS 2A HOISTING LICENSE PRACTICE EXAM/ MASSACHUSETTS 1C HOISTING LICENSE STUDY GUIDE ALL QUESTIONS AND CORRECT ANSWERS/ MOST RECENT AND COMPLETE VERSION GRADED A+/ BRAND NEW!!!

1.  manufacturer's specification: all hoisting machinery shall be operated in accor- dance with the: 2.  inoperable and secure: maintenance repair and refueling shall be done when the machine is: 3.  daily: visual inspection shall be made of wire ropes, bearings, gears, friction clutches, brakes, chain drives and other parts subject to wear on all hoisting machinery to ensure against development of unsafe conditions 4.  2: factory of safety. all parts ...

2A-1C Hoisting License MA

MASS 2A-1C Hoisting Questions and Answers Rated A+ How many pounds in a ton? 2000 pounds What type of equipment requires a H/H license in Mass? 10 feet or either, 1/4 cu/yd 500 pounds What type of system is used when working on de-energized circuitry? Lock out/Tag out All welding and cutting on hoisting equipment must be done in accordance with what code? 1998 ASME Chapter IX What type of protection is required for hoisting operation? ROPS, Heat, Seatbelts, Shatterproof Glas...

Mass Hoisting License Exam Prep 2A & 1C

2A/1C Questions With Solutions What type of protection should be given to the operator of material handling and moving equipment? Weather, heat in the winter, shatter proof glass, roll over protection system (ROPS) What type of equipment requires a hoisting license? If it lifts higher than a loft, lifts more than 500LBS, or bucket exceeds a quarter (1/4) yard What is the maximum limit of approach of power lines when operating hoisting machinery? Up to 125k volts at 10 feet away, 125k...

MASS 2A-1C Hoisting-Massachusetts 1C Hoisting License Questions with Verified Answers How many pounds in a ton? - CORRECT ANSWER-2000 pounds What type of equipment requires a H/H license in Mass? - CORRECT ANSWER-10 feet or either, 1/4 cu/yd 500 pounds What type of system is used when working on de-energized circuitry? - CORRECT ANSWER-Lock out/Tag out All welding and cutting on hoisting equipment must be done in accordance with what code? - CORRECT ANSWER-1998 ASME Chapter IX Wha...

Hoisting license 2a - 1c exa with correct solutions