Landing gear - Study guides, Class notes & Summaries

GEN CPAER Study Guide Questions with Answers All Correct three airframe types - Answer-truss, semi monocoque, composite truss is made up of - Answer-lengthwise tubes called longerons and struts placed span wise for extra strength semi monocoque is made up of - Answer-a series of formers or bulkheads held together by stringers running lengthwise if you remove stringers from semi monocoque what airframe type do you get - Answer-monocoque what are composite airframes made of - Answe...

What is a monocoque fuselage structure? Answer This is a structure without any internal framework, where the skin carries all of the flight loads. 2-3 What is a semi-monocoque fuselage structure? Answer This is a structure that has an internal substructure attached to the aircrafts skin in order to increase the strength of the fuselage. 2-4 What does the empennage consist of? Answer Usually it consists of a vertical stabilizer, the rudder, the vertical stabilizer, and the elevator. 2-5 ...

fixed-wing aircraft structure 1. Fuselage 2. Wings 3. Tail assembly or empennage 4. Landing gear 5. Powerplant 6. Flight instruments/controls and control surfaces fuselage body of an airplane. Contains the cockpit, the cabin, the cargo area if there is one, and attachment points for other major airplane components, such as wings, tail section, and landing gear. cockpit from which the pilots and the flight crew control the aircraft's operations Two design types of fuselage construction...

F-35 PLAN CAPTAIN EXAM 2024 WITH 100% CORRECT ANSWERS 1 When winds are above how many knots will you close the canopy if the jet is stationary? - correct answer 60 knots When towing an aircraft, the canopy must be closed when winds are at how many knots? - correct answer 45 knots What is the required tire pressure for the main landing gear tires? - correct answer Ashore: (255-265 PSI) Afloat: (340-360 PSI) What is the required tire pressure for the nose landing gear tires? - corre...

A contractor wants to raise the car speed from 100fpm to 125fpm, it currently has a 12" sheave. What sheave is required? - CORRECT ANS Diam=12" 12/4=3" 25fpm=3" 100fpm + 25fpm= 12"+3"= 15" sheave A MOV (Metal Oxide Varistor) burns out. You replace it, but cannot read voltage or resistance. What should you do? - CORRECT ANS Replace it with a larger MOV On a Ward-Leonard circuit the break is set, but the motor is trying to slip through the break. What is the issue? - CORRECT ANS Suici...

AMT2 SWE elaborated questions and answers 2024/2025 How do you clean helmet visor? - CORRECT ANSWER-SOFT CLOTH AND MILD SOAP SOLUTION; RINSE WITH CLEAN WATER. IAW 13520.1B ENCL 4-31 How do you clean flight gloves? - CORRECT ANSWER-1. DON THE GLOVES. 2. WASH WITH SOAP AND WATER AS IF WASHING HANDS. 3. WHEN GLOVES ARE CLEAN, RINSE AND REMOVE FROM HANDS. 4. SQUEEZE, BUT DO NOT WRING GLOVES TO REMOVE EXCESS WATER. 5. PLACE THE GLOVES FLAT ON A TOWEL, AND FOLD THE TOWEL TO COVER GLOVES MA...

EXAM: Commercial Pilot Certification Written Test Practice Exam| 262 Questions and Answers Notification to the NTSB is required when there has been substantial damage A.) which adversely affects structural strength or flight characteristics. B.) to an engine caused by engine failure in flight. C.) which requires repairs to landing gear. Correct Answer-A.) which adversely affects structural strength or flight characteristics

ATR 72-600 Exam Questions And Answers Maximum Operating Altitude 25,000 feet Maneuvering Limit Load Factors, gear and flaps retracted -1 (g) gees, to 2.5 (g) gees Brainpower Read More Previous Play Next Rewind 10 seconds Move forward 10 seconds Unmute 0:01 / 0:15 Full screen Maneuvering Limit Load Factors, gear and/or flaps extended 0 (g) gees, to 2.5 (g) gees Cargo door crosswind component limitation Do not operate cargo door with a crosswind component of ...

Notification to the NTSB is required when there has been substantial damage A.) which adversely affects structural strength or flight characteristics. B.) to an engine caused by engine failure in flight. C.) which requires repairs to landing gear. - ️️A.) which adversely affects structural strength or flight characteristics. NTSB Part 830 requires an immediate notification as a result of which incident? A.) Damage to the landing gear as a result of a hard landing. B.) Any required fl...

1. While approaching the airport, you are 15 miles from the runway at 3,000 AFL. As you begin to configure the aircraft for landing, when would you expect the hydraulic ACMP's 1 and 2 to turn on? - ️️When the flaps are selected to any position greater than 0 10. In the event of a total loss of hydraulic systems 1 and 2 the only way to stop the aircraft is with reverse thrust? - ️️False 100. What is the minimum fuel temperature for the ERJ-175? - ️️-37C 101. Prior to pushback, yo...