Millwright exam Study guides, Class notes & Summaries

MILLWRIGHT EXAM 1 -100 QUESTIONS AND ANSWERS

Compared to fibre core, IWRC tends to be _______ resilient and less capable of absorbing shock loads a. more b. less c. equally d. slightly more - Answer- b. less What rope is considered to be a standard wire a. Lang lay b. right regular lay c. left regular lay d. performing lay - Answer- b. right regular lay What safety factor is used for elevators? a. 30-1 b. 10-1 c. 20-1 d. 10-80 - Answer- ? Google What is the maximum capacity in Kg of a medium duty ladder? a. 136 b. 1...

Millwright Exam Questions With 100% Correct Answers companies with stronger safety cultures usually have: -fewer at risk behaviors -lower accident rates -less employee turnover -lower absenteeism -higher productivity list the different types of electrical accidents: -burns -electrical shock -explosion -falls caused by electric shock -fires what is Canada's national hazard communication standard WHMIS what provincial body is set up to administer the provisions of the working comp...

Millwright Exam 1 – 100 Questions & Correct Answers

NCCER MILLWRIGHT PRACTICE EXAM 2 QUESTIONS AND ANSWERS 100% ACCURATENCCER MILLWRIGHT PRACTICE EXAM 2 QUESTIONS AND ANSWERS 100% ACCURATENCCER MILLWRIGHT PRACTICE EXAM 2 QUESTIONS AND ANSWERS 100% ACCURATE unusual - ANSWER-If the seal was not properly aligned or there is excessive wear in some bearing or shaft,_______ wear tracks will be the indicator sharpened brass putty knife - ANSWER-For removing hard to remove gasket materials found on sealing surfaces, ______ is recommended Conducted...

Millwright Exam Prep; Questions and Answers 100% Solved 1. When the downward force at C2 is 100 lb and D2 = 2.5 inches, the upward force at C1 will be ________lb if D1 = 4 inches. A. 160 B. 256 C. 384 D. 240 Correct answer A. 160 x/12.56 sq in = 100 lbs/7.85 sq in x = (100lbs/7.85 sq in)12.56 x = 160 lb

1. When the downward force at C2 is 100 lb and D2 = 2.5 inches, the upward force at C1 will be ________lb if D1 = 4 inches. A. 160 B. 256 C. 384 D. 240 - correct answer A. 160 x/12.56 sq in = 100 lbs/7.85 sq in x = (100lbs/7.85 sq in)12.56 x = 160 lbs 2. Add the following decimals and express the answer to three decimal places. 0.4789 + 3.125 + 9.656 A. 13.26 B. 13.3 C. 13.259 D. 13.2599 - correct answer C. 13.259 3. What are common materials used as electrical conductor...

Which of the following best describes a free flow control valve? A) It is the simplest form of directional control allowing flow in one direction only B) They are used to prevent a load suspended by a cylinder from free fall C) They operate actuators at different times D) They make a humming sound when activated E) They control the rate of fluid flow in a hydraulic circuit - correct answer E) They control the rate of fluid flow in a hydraulic circuit A lifter is a solid or hydraulic de...

Millwright Test Exam Questions With Verified Answers Graded A+ 2024/2025 If the seal was not properly aligned or there is excessive wear in some bearing or shaft______ wear tracks will be the indicator. Unusual For removing hard to remove gasket materials found on sealing surfaces ______ is recommended. sharpened brass putty knife Apprenticeship training is Conducted on the job Charting alignment on a graph requires a chart that is divided into thousandths of an inch verticall...