Nace cip 1 standard 2 - Study guides, Class notes & Summaries

How is the process of steel corrosion ALWAYS described? - electrochemical Based on the galvanic series presented in the NACE CIP Level 1 Manual, which three can be used effectively as galvanic anodes for carbon steel? - zinc, aluminum, magnesium A decrease in temperature will generally cause the corrosion rate to _____ - decrease The electrolyte is a medium which carries the following type of current? - Ionic Corrosion occurring uniformly across a surface is called _____ - general corrosi...

Dew point is the temperature at which - ANSWER-condensation occurs. You are the NACE Inspector on a tank lining project where a 50% solids epoxy tank lining is being applied. After application of the 19 coat you notice small blisters in some areas of the applied lining. Your FIRST preferred course of action is to: - ANSWER-Document the problem and advise the Contractor and Owner's representative. If a contractor is using a poorly maintained compressor to supply air for abrasive blast clea...

NACE CIP Level 1 & 2 Sample Quizes With 100% Correct Questions And Answers All of the following are generally included within inspection reports EXCEPT - cost information When applying coatings, instruction regarding appropriate types of Personal Protection Equipment (PPE) will always be found within the - material safety data sheet (MSDS) or safety data sheet (SDS) Material inventory report should contain all of the following EXCEPT - overall cost of materials According to the N...

NACE CIP Level 2 Complete Study Guide Exam. WJ-1 (visual cleanliness) is comparable to which abrasive blast cleaning standard? - CORRECT ANSWER ISO SA 3 Robotic water jetting includes - CORRECT ANSWER *attaches using vacuum, cables or magnets *Vertical, Horizontal or overhead surface *Controlled by single operator *Collects in excess of 95% of the water, removed coatings and rust (waste generated) A typical waterjetting team consists of? - CORRECT ANSWER *Nozzle operator *Pump Op...

NACE CIP - Study Materials Final Exam Quiz. NACE #1/SSPC-SP5 - CORRECT ANSWER WHITE METAL BLAST CLEANING. When viewed without magnification the surface shall be free from visible oil, grease, dust dirt, mill shcale, rust , coating, oxides, corrosion products and other foreign matter. NACE #2/SSPC-SP 10 - CORRECT ANSWER NEAR WHITE METAL BLAST CLEANING. When viewed without magnification the surface shall be free from visible oil, grease, dust, dirt, mill scale, rust, coating, oxides, corrosi...

NACE CIP 1 Exam Questions With Verified Answers New Update 2023 | 2024 (Graded A+) How is the process of steel corrosion ALWAYS described? electrochemical Based on the galvanic series presented in the NACE CIP Level 1 Manual, which three can be used effectively as galvanic anodes for carbon steel? zinc, aluminum, magnesium A decrease in temperature will generally cause the corrosion rate to _____ decrease The electrolyte is a medium which carries the following type of current? Ionic C...

NACE CIP 1 CBT EXAM PRACTICE QUESTIONS AND ANSWERS GRADED A+ Dew point is the temperature at which condensation occurs. You are the NACE Inspector on a tank lining project where a 50% solids epoxy tank lining is being applied. After application of the 19 coat you notice small blisters in some areas of the applied lining. Your FIRST preferred course of action is to: Document the problem and advise the Contractor and Owner's representative. If a contractor is using a poorly maintained comp...

NACE CIP Level 1 & 2 Sample Quizes With 100% Correct Questions And Answers All of the following are generally included within inspection reports EXCEPT - cost information When applying coatings, instruction regarding appropriate types of Personal Protection Equipment (PPE) will always be found within the - material safety data sheet (MSDS) or safety data sheet (SDS) Material inventory report should contain all of the following EXCEPT - overall cost of materials According to the N...

NACE CIP 2 Exam| Questions and Verified Answers (2023/ 2024) Q: Disadvantages of Plural component spray over single component spray Answer: higher cost, high volt heaters are required, more qualified operator, more hoses for operator to work with Q: Advantages of Plural component spray over single component spray Answer: Accurate mixing without human element, sprays very thick solvent free materials without thinners & sprays materials with very short pot life. Q: 2 major...

NACE CIP L1 Exam 2023 Questions and Verified Answers Q: The estimates for coating failures attributable to inadequate or poor surface preparation ranges between _____% to _____% Answer: 75-90% Q: Any deviations from the specification are always authorized and documented in _______. Answer: Writing Q: Centrifugal blasting operations should use the SSPC-SP ____ preparation standard before blasting begins Answer: SSPC-SP 1 Q: Does waterjetting leave a anchor p...