Oil burners - Study guides, Class notes & Summaries

Oil Burners State test Questions with Complete Solutions

Oil Burner License Exam 2023 Questions and Answers complete.

What is a general requirement of the location of the installation of a boiler? - ANSWERSAdequate clearance from combustile construction What temperature must the materials remain under during combustion? - ANSWERS170 degrees What is a requirement for the access of the boiler? - ANSWERSAccess for operation and maintenance must not be hazardous What is required upon installation to operate a boiler? - ANSWERSInspection and test resulting in equipment use permit from commissioner How of...

how should an oil tank be supported - ANSWER Ridgid non-combustible supports to prevent settling, sliding, or lifting what is the wire gauge used on oil burner circuits - ANSWER 14 gauge minimum how is an oil burner wired - ANSWER oil burners are wired intermittent or interrupted what does intermittent or interrupted mean - ANSWER intermittent - Transformer stays on throughout the burner firing cycle interrupted - Transformer drops out after flame established who approves oil bu...

Oil Burners Questions with 100% Correct Answers | Latest Version 2024 | Expert Verified | Ace the Test

Oil Burners State Test Exam With 100% Correct Answers 2024

In an electric circuit for the wattage to remain the same if the voltage drops, the amperage must - ANSWER Increase Atomizing type burners were designed to burn which type of fuel - ANSWER Type 2 fuel oil Pour point problems with outside above ground fuel tanks can be partially relieved by - ANSWER Reducing the pour point of No. 2 fuel oil by blending it with No. 1 fuel oil. A fuel oil storage tank cannot be installed - ANSWER In the furnace room with 5' of heating unit. The primary...

Oil Burner License Exam Questions and Answers, Latest Updated 2024/2025 (Verified Answers) What is the first thing a tech should do when arriving at a no combustion call? - AnswerAsk how many times the customer reset the unit. What is the best long term solution for preventing a clogged nozzle? - Answer- -Remove any underground storage tanks. -Install a quality oil filter. -Cut the suction line 10" above the tank outlet to prevent sludge. Hot water and steam valves are interchangeable. - A...

Oil Burner License Exam Questions and Answers, Latest Updated 2024/2025 (Verified Answers) What is the first thing a tech should do when arriving at a no combustion call? - AnswerAsk how many times the customer reset the unit. What is the best long term solution for preventing a clogged nozzle? - Answer- -Remove any underground storage tanks. -Install a quality oil filter. -Cut the suction line 10" above the tank outlet to prevent sludge. Hot water and steam valves are interchangeable. - A...