Osha 30 cranes Study guides, Class notes & Summaries

CHST STUDY GUIDE LATEST UPDATE GRADED A+ Which of the following is NOT a significant factor in determining the impact of an electrocution event on a worker? The amount of electrically resistant material present in work boots and work gloves A Hearing Conservation Program is required under OSHA regulation 29 CFR 1926.52 (Occupational Noise Exposure) when workers are exposed to noise levels in excess of an eight- hour time-weighted average of _________. 90 decibels (dB) Per 29 CFR...

1) What is meant by the term "two blocking Correct Answer: The load block contacts the boom point sheaves. 2) lifting 20,000lbs, with a 2-leg bridle sling at a 30 horizontal sling angle, what is force applied to each leg? Correct Answer: 20,000 3) In multiple crane lifts using an equalizer beam, the weight of the beam should be considered: Correct Answer: Part of the load weight 4) What is required if there is a deviation in the lift plan? Correct Answer: A new li...

ASME B30.5 - Mobile and Locomotive cranes, all types ASME B30.3 - Tower Cranes ASME B30.23 - Personel Lifting Regs OSHA 29 CFR 1926.1400 Series - Cranes & Derrick's used in Construction regs. Rotation Resistant Wire Rope - 2 randomly broken wires in 6 diameters. 4 randomly broken wires in 30 diameters. Safety factor 5.0 Safety factor personel lifts 10-1 ASME B30.9 - Slings Personel Platforms ASME B30.23 - Maximum Wind 15mph Cranes capacity not exceed 50% Rigging 5-1 Safety Factor, i...

1.) List OSHA's purpose - a.)(Example) Reduce workplace hazards (pg 2 spiral bound notebook) b.)Implement new or improved existing safety and health programs. c.)Provide for research to assist solving occupational safety and health 2.) List an example of a Consensus Standard - NFPA No 30-1969. Flammable and Combustible Liquids Code is the source for Part 1910, Section 106 (OSHA Standards tab pg 2) 3.) Title 29, Chapter XVII is set aside for OSHA and the regulations are broken down into Par...

NCCCO RIGGING 1 & 2 Final Exam Latest Updated Q&A OSHA 1910 - CORRECT ANSWER-General Industry Standards OSHA 1926 - CORRECT ANSWER-Construction Industry Standards OSHA 1910.180 - CORRECT ANSWER-Crawler, Locomotive and Truck Cranes OSHA 1910.184 - CORRECT ANSWER-Slings OSHA 1926.251 - CORRECT ANSWER-Rigging Equipment used for material handling OSHA 1926.1400 - CORRECT ANSWER-Cranes and Derricks used in construction ASME B30.3 - CORRECT ANSWER-Tower Cranes ASME B30.5 - CORRECT ANSWER-Mobi...

OSHA 30 Crane Safety: Mobile Cranes- Construction Cleanup Exam Questions And Answers (Verified And Updated) Which of the following images is a wheel-mounted crane? - answerimage 2 While mechanical failure results in some accidents, ___ is the most common cause of crane and hoist accidents? - answerHuman error The majority of deaths that occur are not the crane operator, but other workers in the area. The leading cause of these deaths is electrocution form contact with _____. - answerPower...

NCCCO MOBILE CRANE EXAM QUESTIONS AND ANSWERS LATEST UPDATE 2024/2025 (100% VERIFIED) When hoisting personnel, within what percentage of level must a telescopic boom crane be in order for the gross ratings in the load chart to remain valid? a. 1% b. 2% c. 5% d. 8% correct answers a. 3. The load line of the crane you're operating contacts an energized power line. There's no sign of any other danger, such as fire. What should you do? a. Climb down carefully from the crane cab b. Jump do...

1.) List OSHA's purpose - ANSWER-a.)(Example) Reduce workplace hazards (pg 2 spiral bound notebook) b.)Implement new or improved existing safety and health programs. c.)Provide for research to assist solving occupational safety and health 2.) List an example of a Consensus Standard - ANSWER-NFPA No 30-1969. Flammable and Combustible Liquids Code is the source for Part 1910, Section 106 (OSHA Standards tab pg 2) 3.) Title 29, Chapter XVII is set aside for OSHA and the regulations are...

OSHA 30 Crane Safety Mobile Cranes- Construction CleanupWhich of the following images is a wheel-mounted crane? - correct answer image 2 While mechanical failure results in some accidents, ___ is the most common cause of crane and hoist accidents? - correct answer Human error The majority of deaths that occur are not the crane operator, but other workers in the area. The leading cause of these deaths is electrocution form contact with _____. - correct answer Power lines What type of cra...

OSHA 30 CRANE SAFETY 100% VERIFIED & CORRECT QUESTIONS AND ANSWERS standards for crane safety can be found in a. 29 cfr 19 subpart cc which of the following is an employer requirement d. all of the above you must assure your crane is stable by each except b on-board seismograph load charts must b. indicate rated lifting capacity ad be visible to operator an annual inspection of each crane is d all of the above cranes must maintain a min of ___ feet away from pier lines c 10' ...