Ase a5 2023 solved Study guides, Class notes & Summaries

1. 1. On a car with disc/drum brakes, the front brakes grab quickly when light pedal pressure is applied. This problem could be caused by a bad: A. proportioning valve B. pressure safety switch C. metering valve D. residual check valve: 1. The correct answer is C. The metering valve delays the flow of brake fluid to the front calipers until the pressure in the system rises to a point where the wheel cylinder can overcome the tension of the brake shoe return springs. The purpose is to have b...

The brakes are dragging on a vehicle. this could be cause by a. overfilled master cylinder reservoir b. low vacuum to the boost c. bypassing master cylinder d. quick take-up valve stuck open - ANSWER-A : overfilled master cylinder reservoir why : an overfilled master cylinder reservoir cylinder would not allow for fluid expansion. this would cause the brakes to self apply as the fluid expanded as result in brake drag The brake pads are worn at an angle on a vehicle with a sliding b...

1. A hydro-boost brake system has reduced braking performance. Technician A says to check the power steering system. Technician B says to check the vacuum check valve. Who is correct?: TECH A is correct. The power steering pump produces pressure for the Hydro-Boost unit. 2. A vehicle with power assisted brakes has a hard brake pedal. Which of the following is LEAST likely to cause this condition? A. Master cylinder. B. Vacuum check valve. C. Brake booster. D. Low manifold vacuum.: Answer ...

SOLVED - Elaborated ASE A5 – BRAKES Exam 1 for 2023 Ace in your Exams in 1 attempt! SOLVED - Elaborated ASE A5 – BRAKES Exam 1 for 2023 Ace in your Exams in 1 attempt!A5 –ASE BRAKES Exam 1 for 2023 Ace in your Exams in 1 attempt! A - |Ans| >> A drum is chattering on the brake lathe. This could be the result of: A. Failure to install the dampening belt. B. Cutting too slowly. C. Dull cutting blades. D. Cutting speed too fast. C - |Ans| >> A vehicle is equipped with a hydro-boos...