Ase brake exam 2024 - Study guides, Class notes & Summaries

ASE Brakes A5 Test (Exam 1, 2, 3) Questions with 100% Correct Answers | Latest 2023/2024 A drum is chattering on the brake lathe. This could be a result of a. failure to install the dampening belt b. cutting too slowly c. dull cutting blades d. cutting speed too fast -- A : failure to install the dampening belt why : a missing dampening belt could cause the drum to vibrate while on the lathe. this vibration can cause the drum to bounce on the cutting tip and make a chattering noise A veh...

ASE A5 PRACTICE TEST EXAM 2024 WITH 100% CORRECT ANSWERS 1. On a car with disc/drum brakes, the front brakes grab quickly when light pedal pressure is applied. This problem could be caused by a bad: A. proportioning valve B. pressure safety switch C. metering valve D. residual check valve - correct answer C 2. The driver of a vehicle with power disc/drum brakes says that the brake pedal moves slowly to the floor while maintaining pedal pressure at a stoplight. What could cause thi...

ASE Practice Exam Questions & Answers 2024/2025 1. On a car with disc/drum brakes, the front brakes grab quickly when light pedal pressure is applied. This problem could be caused by a bad: A. proportioning valve B. pressure safety switch C. metering valve D. residual check valve - ANSWERSC 2. The driver of a vehicle with power disc/drum brakes says that the brake pedal moves slowly to the floor while maintaining pedal pressure at a stoplight. What could cause this problem? A. ...

ASE BRAKES Exam #1 | Questions and Correct Answers | Latest Update 2024/2025 A - Answer -A drum is chattering on the brake lathe. This could be the result of: A. Failure to install the dampening belt. B. Cutting too slowly. C. Dull cutting blades. D. Cutting speed too fast. C - Answer -A vehicle is equipped with a hydro-boost brake system has a hard pedal with little braking action. Which of the following could be the cause? A. Low brake fluid B. Air in the brake fluid C. Low power...

Complete ASE Brake A5 Study pack with Questions and Detailed Answers EXAM 1 TO EXAM 5 2023/2024 UPDATED

ASE Exam #1 Questions & Answers 2024/2025 A - ANSWERSA drum is chattering on the brake lathe. This could be the result of: A. Failure to install the dampening belt. B. Cutting too slowly. C. Dull cutting blades. D. Cutting speed too fast. C - ANSWERSA vehicle is equipped with a hydro-boost brake system has a hard pedal with little braking action. Which of the following could be the cause? A. Low brake fluid B. Air in the brake fluid C. Low power steering fluid D. An overtightene...

ASE A5 PRACTICE EXAM 2024 WITH 100% CORRECT ANSWERS A vehicle with ABS anti-lock brakes has an audible clicking noise when it is first started. The noise goes away after a few seconds. Technician A says this is one of the hydraulic valves in the hydraulic valve assembly sticking. Technician B says this is a normal condition. Who is correct? - correct answer TECH B is correct. The ABS system runs a system check when the key is first turned to the ON position. The valves sometimes make a clic...

ASE Prep Exam Questions & Answers 2024/2025 A vehicle is brought in with a bent subframe. Technician A says to section the subframe. Technician B says the subframe should not be repaired and must be replaced. Who is right? A, B, Both, or Neither - ANSWERSTechnician B only The subframe should never be sectioned, and should rarely, if ever, be worked. It is typically a bolt-on part that does not lend itself to traditional straightening methods. Vehicle manufacturers recommend replaceme...

ASE BRAKES Exam #1 | Questions and Correct Answers | Latest Update 2024/2025 A - Answer -A drum is chattering on the brake lathe. This could be the result of: A. Failure to install the dampening belt. B. Cutting too slowly. C. Dull cutting blades. D. Cutting speed too fast. C - Answer -A vehicle is equipped with a hydro-boost brake system has a hard pedal with little braking action. Which of the following could be the cause? A. Low brake fluid B. Air in the brake fluid C. Low power...

ASE: A5 BRAKES EXAM 2024 WITH 100% CORRECT ANSWERS A drum is chattering on the brake lathe. This could be the result of: - correct answer Failure to install the dampening belt A vehicle equipped with a hydro-boost brake system has a hard pedal with little braking action. What could be the cause? - correct answer Low power steering fluid What could cause excessive noise while braking? - correct answer Missing clips A vehicle equipped with a "hill holding" option has an ABS code. W...