Ase brakes exam questions - Study guides, Class notes & Summaries

ASE A5 BRAKES EXAM NEWEST ACTUAL EXAM COMPLETE 80 QUESTIONS AND CORRECT DETAILED ANSWERS (VERIFIED ANSWERS)

Michigan ASE Brake Certification Exam Questions And Answers (Verified And Updated) Air in Hydraulic System - answerA spongy brake pedal may be caused by Excessive tire pressure - answerCan not cause very erratic brake pulling while applying brakes Excessive brake pedal travel - answerA power assist brake booster push rod that is too short will cause Brake drum machined beyond its limits - answerCan cause brake pedal fade Repair leak and replace brake linings - answerHow to correctly ser...

drum is chattering on the brake lathe. This could be the result of: A missing dampening belt could cause the drum to vibrate while on the lathe. This vibration can cause the drum to bounce on the cutting tip and make a chattering noise. A vehicle equipped with a hydro-boost brake system has a hard pedal with little braking action. Which of the following could be the cause? Low power steering fluid can cause the booster to provide very little if any boost. 10 Must-Have Accessories for...

Disc brakes use replaceable friction material called __________. - Answer- Pads Drum brakes use replaceable friction material called ________. - Answer- Shoes Technician A says that a power-assisted brake reduces stopping distances compared with a non-power-assisted brake system. Technician B says that the power-assisted brake system reduces the force that the driver must exert on the brake pedal. Which technician is correct? - Answer- Technician B only A locked wheel __________________...

ASE BRAKES Exam Complete Questions and Answers 2024 Latest Edition

ASE A5 Brakes Exam Questions and Answers 2024.

ASE Brakes A5 Test (Exam 1, 2, 3) Questions with 100% Correct Answers | Latest 2023/2024 A drum is chattering on the brake lathe. This could be a result of a. failure to install the dampening belt b. cutting too slowly c. dull cutting blades d. cutting speed too fast -- A : failure to install the dampening belt why : a missing dampening belt could cause the drum to vibrate while on the lathe. this vibration can cause the drum to bounce on the cutting tip and make a chattering noise A veh...

On a car with disc/drum brakes, the front brakes grab quickly when light pedal pressure is applied. this problem could be caused by a bad: A: proportioning valve B: Pressure safety switch C: metering valve D: Residual check valve - Answer- C: metering valve The driver of a vehicle with power disc/drum brakes says the brake pedal moves slowly to the floor while maintaining pedal pressure at a stoplight. What could cause this problem? A: leaking primary piston cup in master cylinder B: l...