Asme final Study guides, Class notes & Summaries

NEIEP 200 Final VERIFIED100% SOLUTIONS 2023//2024 Which lay of wire rope has the strand wires in line with the rope axis? - ANSWER Regular Lay At what speed should the counterweight safeties be set to trip? - ANSWER Up to 10% higher than the car governor Which type of safety uses an oil buffer between the car and safety planks? - ANSWER Type C What is the purpose of the terminal motion switch? - ANSWER slow down and stop the car automatically at or near the top or bottom landin...

NEIEP 200 Final Exam Version 2 (Latest 2023/ 2024 Update) Questions and Verified Answers| 100% Correct| Grade A Q: a mechanic attaches a chainfall to a hoisting beam with a beam clamp. what happens to the capacity of the hoisting beam? Answer: it is reduced to 50% of original capacity Q: you are rigging elevator equipment with a sling angle of 60 degrees. you are using a shouldered eye bolt with a tapped 1/2" diameter hole. once the shoulder is seated, what is the minimum thread...

CTR 156CT Propane Final Exam Questions and Correct Answers If you see an "S" next to the date on a cylinder, that means the cylinder must be requalified _________ from that date. - ANSWER 10 years ____________ control the flow of propane through the piping system of a dispenser. - ANSWER Valves At room temperature, propane is in what state? - ANSWER Gas Make sure there are no ignition sources within _______ feet of the autogas filling area. - ANSWER ...

ASME final

ASME final

A Hydrotest is conducted on an underground line as a substitute for the external inspection. The test pressure is 200 Psig. At the end of the test, the pressure must be at least - API 570 9.8.6 190 Psig. Determine the maximum allowed pressure for a Class 300 flange that has a design temperature of 950 °F. The flange material is ASTM A217 Gr. C12 - B16.5 Table 1.1-1 375 Psig. An 8 NPS pipe is being replaced with A106 gr. B material. The pipe retirement thickness (Tmin) is 0.218" and the ...

API 570 - Open Book - Practice Exam 2024 Already Passed A Hydrotest is conducted on an underground line as a substitute for the external inspection. The test pressure is 200 Psig. At the end of the test, the pressure must be at least - API 570 9.8.6 190 Psig. Determine the maximum allowed pressure for a Class 300 flange that has a design temperature of 950 °F. The flange material is ASTM A217 Gr. C12 - B16.5 Table 1.1-1 375 Psig. An 8 NPS pipe is being replaced with A106 gr. B mater...

API 653 FINAL EXAM QUESTIONS AND ANSWERS GRADED A+ SECTION 1,,2,3 API-653 covers which of the following types of tanks? a) Carbon and low alloy steel tanks built to ASME Section VIII, Div.1 b) Carbon and low alloy steel tanks built to ASME Section X c) Carbon and low alloy steel tanks built to API - 650 and 12C d) Carbon and low alloy steel tanks built to API - 510 - ANSWERS C API-653 provides the requirements for construction of which of the following? a) Process pressure vessels b) ...

NCCCO RIGGING 1 & 2 Final Exam Latest Updated Q&A OSHA 1910 - CORRECT ANSWER-General Industry Standards OSHA 1926 - CORRECT ANSWER-Construction Industry Standards OSHA 1910.180 - CORRECT ANSWER-Crawler, Locomotive and Truck Cranes OSHA 1910.184 - CORRECT ANSWER-Slings OSHA 1926.251 - CORRECT ANSWER-Rigging Equipment used for material handling OSHA 1926.1400 - CORRECT ANSWER-Cranes and Derricks used in construction ASME B30.3 - CORRECT ANSWER-Tower Cranes ASME B30.5 - CORRECT ANSWER-Mobi...

Tower crane 119 CORRECT QUESTIONS AND ANSWERS 2024 FINAL UPDATE EXAM PASS A+ Not less than 18 times rope diameter - ANSWER-Asme B30.3 what is the minimum pitch diameter for load hoisting sheaves Not less than 16 times rope diameter - ANSWER-Asme B30.3 what is the minimum pitch diameter for load block sheaves Not less than 15 times rope diameter - ANSWER-Asme B30.3 what is the minimum pitch diameter for boom hoist sheaves Energized until the power company has verified it is not ener...