Back hitch Study guides, Class notes & Summaries

Special Riggers Exam Questions And Answers Bowline - ANS secure safety line Back Hitch - ANS secure rope scaffold Working Hitch - ANS back up to back hitch Overnight Hitch - ANS tie off scaffold at night Becket Hitch - ANS tie rope to block and tackle Rig 3-Part Block - ANS used to hoist rope scaffold Timber Hitch - ANS used to hoist planks, cross braces, etc. Clove Hitch - ANS multipurpose knot Square Knot - ANS tie two ropes together of sa...

Boilermaker NCCR Test Questions And Answers Boilermaker NCCR Test 1 ft 3-3/4 in + 2 ft 1-1/16 in +5 ft 10- 7/8 in = - ANS 9 ft 3-11/16 in A 1-inch plate is to be cut. Why should an acetylene gerulator on a cutting rig not be adjusted over 15 PSI? - ANS Acetylene is unstable above this pressure A big control valve is pulled who is responsible for the rigging? - ANS Crane operator and rigger A boiler maker must have all of the following wh...

All riggin shall have how many checks prior to Loading? 3 All equip. that falls 3 ft onto a hard surface shall be checked for: Burs, sharp edges, dirt, contaminates, lose parts and deformaties Rope deployed from the anchor point to the ground should be deployed: So only the amount needed is with a dynamic anchor Helmets used for rope rescue should be: Lighter in weight Rope gloves shall be Sturdy formfitting gloves with a leather palm T/F: Fall protection ...

OECP Exam Questions With 100% Complete Solutions What are the four different types of crane signals? - Answer- Hand Voice Audible New The shaded area on a load chart indicates _______? - Answer- A structural chart The minimum distance to a power line of unknown voltage is ? - Answer- 50' When hoisting personnel and have known voltage, can you use Table A and get closer than 20'? - Answer- Never! What is the minimum tale swing clearance requirement - Answer- 2' What kind of rigger i...

On a lattice boom crawler crane, the main boom length is measured from the: Center of the boom heel pins to the center of the boom tip sheave What is the main purpose of mid point suspension pendants? To absorb shock that comes with dynamic loading Brainpower Read More Previous Play Next Rewind 10 seconds Move forward 10 seconds Unmute 0:06 / 0:15 Full screen The main purpose of a gantry or a mast on a crane is: To increase the crane's leverage on the boom ...

Bow -ANSWER front of a ship Cleat -ANSWER Metal fitting on which a rope can be fastened Gunwale -ANSWER the upper edge of the side of a boat Hull -ANSWER Body of a vessel Port -ANSWER Left side of a vessel Starboard -ANSWER right side of a vessel Stern -ANSWER Rear of a vessel Beam -ANSWER Maximum width of a vessel Freeboard -ANSWER Distance from water to lowest point of the boat where water could come on board Draft -ANSWER Depth of water needed to float a vessel K...

Special Riggers Exam Questions and Correct Answers Bowline - Correct Answers secure safety line Back Hitch - Correct Answers secure rope scaffold Working Hitch - Correct Answers back up to back hitch Overnight Hitch - Correct Answers tie off scaffold at night Becket Hitch - Correct Answers tie rope to block and tackle Rig 3-Part Block - Correct Answers used to hoist rope scaffold Timber Hitch - Correct Answers used to hoist planks, cross braces, etc. Clove Hitch - Correct A...

1 MISSOURI BOATING LICENSE EXAM | QUESTIONS & ANSWERS (VERIFIED) | LATEST UPDATE | GRADED A+ Bow Correct Answer: Front of the vessel. Stern Correct Answer: Rear of the vessel. Starboard Correct Answer: Right side of the vessel. Port Correct Answer: Left side of the vessel. Hull Correct Answer: Body of the vessel. Gunwale Correct Answer: Upper edge of vessel's side. 2 Cleat Correct Answer: Metal fitting on which a rope can be fastened. Propeller Correct Answer: Rotates and...

PEDIATRICS - HESI PRACTICE EXAM GRADED A LATEST 2 VERSIONS UPDATED APRIL 2023 The nurse is giving preoperative instructions to a 14-year old female client who is scheduled for surgery to correct a spinal curvature. Which statement by the client best demonstrates that learning has taken place? A. I will read all the literature you gave me before surgery. B. I have had surgery before when I broke my wrist in a bike accident, so I know what to expect. C. All the things people have told me ...

NCCER Module 9 Introduction to Materials Handling Already Passed What is the proper procedure to lift objects? Lift with your legs, keep your back straight, and keep your head up. In order to work with motorized materials-handling equipment, you must be? trained, certified, and authorized Before attempting to lift any material, you should look for any? protruding nails, wires, or sharp edges Before attempting to lower and overhead load,________. Consider the size of the load. When stacking b...