Bedded position - Study guides, Class notes & Summaries

The moveable upper part of an extension ladder that is raised to various heights is called the: Select one: a. bed section. b. halyard. c. truss block. d. fly section. - ️️fly section. What is a sign of heat exposure on a ladder? Select one: a. Loose bolts or rivets b. Rust c. Expired heat sensor label d. Blistered paint - ️️Blistered paint When an extension ladder is in the bedded position, the halyard cable should be: Select one: a. pulled taut. b. tied to the tie ro...

The moveable upper part of an extension ladder that is raised to various heights is called the: Select one: a. bed section. b. halyard. c. truss block. d. fly section. correct answers fly section. What is a sign of heat exposure on a ladder? Select one: a. Loose bolts or rivets b. Rust c. Expired heat sensor label d. Blistered paint correct answers Blistered paint When an extension ladder is in the bedded position, the halyard cable should be: Select one: a. pulled taut. b. ti...

Essentials of Firefighting 5th Edition: Midterm Chapters 1,2,3,4,5,8,9,10,13,15,17,20 With Complete Solution

rapid flashing red light on HUD 1/4 tank order of 1st due OV ROOF access BAR (adjoining building, aerial, rear fire escape) portable ladder placement against building next to fire escape 1'-3' above railing Yellow hydrant disk frozen blue hydrant disk partially OOS white hydrant disk OOS working load of LSR 600 lbs length of LSR 150ft length of search rope 200ft diameter of LSR 9/16 diameter of search rope 5/16 ...

IFSTA Chapter 8 & 9 Exam | Questions and Verified Answers| 100% Correct Q: When an extension ladder is in the bedded position, the halyard cable should be: (322) [4.3.6] A. pulled taut. B. left hanging freely. C. tied to the tie rods. D. supported by the pawls. Answer: A. pulled taut. Q: Ground ladders should be service tested at least once a year and: (323) [4.5.1] A. after being subjected to high heat or rough treatment. B. a minor service test should be done on t...

Ch. 1-7 IFSTA Aerial Operator questions with correct answers ___: the fully extended length of the ladder. - Correct Answers The working height _____: provides the primary function of providing continuous rotation of the aerial device on a horizontal plane. - Correct Answers Turntable the working height of north American-made aerial ladders range from ___ to ___ feet. - Correct Answers 50 to 135 feet The working height for aerial ladders is measured from: - Correct Answers the ground t...

Essentials of Firefighting 5th Edition: Midterm Chapters 1,2,3,4,5,8,9,10,13,15,17,20 Bedded Position - Answer- Extension ladder with the fly section(s) fully retracted. Belay - Answer- A climber's term for a safety line. Fascia - Answer- Flat horizontal or vertical board located at the outer face of a cornice or a broad flat surface over a storefront or below a cornice. Heat Sensor Label - Answer- Label affixed to the ladder beam near the tip to provide a warning that the ladder ha...

IFSTA 7th Edition - Chapter 8: Ground ladders, With Complete Solution The lowest, widest section of an extension ladder that always maintains contact with the ground while the ladder is being raised is the: (315) Bed section Which part of a ladder is placed on the ground when the ladder is positioned? (315) Butt The moveable upper part of an extension ladder that is raised to various heights is called the: (315) Fly section Swivel plates attached to the butt of the ladder are called: (3...

IFSTA 7th Edition - Chapter 8: Ground ladders SOLUTION 2023//2024 The lowest, widest section of an extension ladder that always maintains contact with the ground while the ladder is being raised is the: (315) - ANSWER Bed section Which part of a ladder is placed on the ground when the ladder is positioned? (315) - ANSWER Butt The moveable upper part of an extension ladder that is raised to various heights is called the: (315) - ANSWER Fly section Swivel plates attached to the butt ...